Archive

Category Archives for "DO IT YOURSELF PROJECTS"

How To Make A Log Splitter With A Hydraulic Jack In 6 Steps

A log splitter is handy when it comes to splitting logs because of its much higher efficiency compared to an axe. With the advance of technology, many manufacturers have released hydraulic-piston based log splitter into the market. The new mechanism allows you to quickly finish a cord of wood on your own in a couple of hours.

Yet the price tag of such product is not always a good match to your wallet. In that case, this article shall show you how to make a log splitter with a hydraulic jack. It’s not difficult and you can produce a hydraulic log splitter for your own use with little expense as well.

Read more

How to Use a Strap Wrench Quickly and Effectively

From a stubborn jar lid to a rusty pipe, the strap wrench can solve everything. Learn how to use a strap wrench in a blink of an eye now

More…

How to Use a Strap WrenchOverviewWhat the strap wrench is and its usageOperation principle of a strap wrench•Metal band models•Rubber strap models•Woven nylon modelsConclusion

Overview

A strap wrench is a wonderful tool that can conveniently solve a variety of situation around your house. Common house owners often never hear of it but the strap wrench is truly excellent nerveless. Mostly use by plumbers, the strap wrench will be a nice touch to your toolbox and please you with its versatility.

you-will-know-how-to-use-a-strap-wrench-in-a-blink-of-an-eye

There are a lot of different strap wrench models which may confuse you when you consider buying one. Well in that case, you are lucky since you can learn how to use a strap wrench right here and now. You will also find certain interesting information about the tool itself and its application in common house task. 

What the strap wrench is and its usage

The construction of a classic strap wrench consists of a strap and a handle. Tiny ridges often present on the strap to hold it in place while the wrench is in use. When a need arises, the strap shall wrap around the target object then twist or pull that away from the attached object. 

By removing stuff in a threaded or nonthreaded manner, the strap wrench got many advances compared to other wrenches. It’s very flexible, easy to use and don’t dent or leave scratches on the object which further increases its popularity. The wrench only requires a little strength which makes it a good choice for household use to people of all ages. 

Since it’s originally used by plumbers, the wrench primary purpose is to remove faucet, shower head, pipe, etc. Pretty much anything with a turn or twist connection can be deal with by the strap wrench. This mean if you encounter a tough and tight can lid, the strap wrench can help you open it in no time. 

Operation principle of a strap wrench

There are quite a few strap wrench models out there, most if not all follow the same method of using. First, place the strap on the target object and loop it around. After that, you pull the strap tightly and create a snug as the ridges secure the object in place. 

The next thing to do is just like any usual wrench, turn the handle until the target object come off. If there are any obstructions from the object such as rust or substance, apply extra force till you remove it. When you feel that the strap is slippery, it can be easily replaced and the wrench will be back into action. 

Popular styles of strap wrenches

mechanic-tool-strap-wrench-for-big-nuts

There are a total of 5 common strap wrenches you can find: metal band, rubber, woven nylon, chain and flexible plastic. For household use, the first 3 will be sufficient while the latter 2 is for automobile purposes. If you don’t perform auto repairs, just stick to the household models to save the money. 

With distinct strap material, each of these wrenches has a unique way to use. The principle and function still remain the same though so the difference is not too big. Only the securing, the pulling and the tightening require a bit of your attention. 

The overall flexibility and thickness of the materials may make you feel lost at first but don’t worry. You can find a step – by – step instruction on how to use the household strap wrenches below. Follow them slowly and carefully then you can see that it’s pretty simple to use any of the models. 

Specific way to use the strap wrenches

•Metal band models

A metal band strap wrench employs metal as the strap material. This type can help you get the most out of your body strength with its handle. The metal band appearance is almost like a ratchet with locking clasps or button locks at the end. 

In some models, you may find a swivel that will help you avoid cranking and twisting in an inconvenient position. With that feature, you can quickly start pulling the object toward the wanted direction. The way to use strap wrenches with a metal band is as follow:

  1. Open the locking pin or detach the locking clasp
  2. Wrap the band around the object
  3. Promptly pull the band taught and close the locking pin like at the start. Or slide the band back under the clasp until it’s tightly fitted and attach the clasp.
  4. Make sure the metal band is not slipping then proceed to twist and pull the object out. If the band can still wiggle then keep tightening to eliminate all possible gap. In case that the situation is not improving, consider getting another band with a smaller diameter

•Rubber strap models

As the name suggests, the strap in this wrench utilizes rubber as its material. The wrench may look kind of flimsy but if you use it right, the wrench got respectable strength. 

the-strap-in-this-wrench-utilizes-rubber-as-its-material

  1. Take the loose end of the rubber strap and wrap it around the target object.
  2. Slide the loose end through the second slot by the head of the wrench. This should be the only open slot since the first slot is already occupied with the other strap end.
  3. When you finished sliding the loose end through the slot, pull both as tight as possible. That will let you have good grip on the target object.
  4. Hold the ends tight then simply turn the wrench. There may be an auto lock mechanism in certain product but play it safe anyway

•Woven nylon models

This type work just like the rubber models, one notable difference is that the strap won’t stretch or wear out if get wet. The strap is much bigger and thicker to handle big and odd shaped objects. Woven nylon also permits a noticeably better grip than other materials. 

  1. Warp the loose end of the strap around the object.
  2. If your wrench has a handle, do the same and tighten the loose end as wit the rubber models. In the case that the wrench doesn’t have a handle, arrange the buckle away from you in a 180 degrees angle. This is the starting point for you to turn and twist.
  3. Slide the loose end back through the buckle and make it tight.
  4. Now proceed to pull the other loose strap end in the direction you want to remove the object.

Conclusion

And that should cover all the necessary part, easy to understand, right? Knowing how to use a strap wrench is really helpful. If you got this right, you can solve a multitude of problems by the strap wrench without breaking a sweat

Do you enjoy the article? Is so then comment to share us your opinion, like and share.

How to Paint High Walls without Scaffolding | A Guide on DIY

Struggle to reach the high walls while trying to paint them? If only you have a scaffolding, you can do this very easy. Unfortunately, you don’t have such thing around your house. So how can you finish your painting project now? There is no need for any concern. You can learn how to paint high walls without scaffolding right here right now.

More…

How to Paint High Walls without ScaffoldingOverviewThe necessary gears and toolsThe painting process•Step 1: Prepare the painting space•Step 2: Prime the walls•Step 3: Paint the walls•Step 4: Clean upConclusion

Overview

So you noticed that the painting of your house has considerably degraded. Naturally, you would plan to repaint all the walls when you the chance. When that day comes, you run into an unexpected issue: Some of the walls are too high. No matter what you try, you can’t reach them by yourself. And as if you will give up everything now. In that case, this article will be helpful to your situation.

how-to-paint-high-walls-without-scaffolding

Scaffolding is a useful tool. You can comfortably reach high places with it as a sturdy base. It’s really beneficial to have one, especially when you want to do some remodeling. But what can you do if a scaffolding isn’t available? How to paint high walls without scaffolding? The answer to that question lies just down below. Look through them and see if you can use them in your case.

The necessary gears and tools

No matter what kind of way you use to paint the walls, your well – being is the most important. This means you have to equip yourself with suitable protective gears. The recommended set up would be a pair of goggles, gloves and face mask. These will prevent paints and their fumes to get into contact with your body. It’s also essential that the working place must be well ventilated before you start painting.

For the method to reach those high walls, there are several things you can get. First would be a ladder. Besides scaffolding, a ladder can elevate you off the ground to reach high places without much issue. In order to fit the house dimension, you may want to use a tractable ladder. But even so, you may have to clear out a lot of things to properly deploy the ladder. The ladder is also cumbersome to maneuver around.

In case that you also don’t have a ladder or want to stay on the ground, there’s the extension pole. As the name suggests, it can extend itself to reach the faraway walls and corners. You can easily refill the paint with this since you don’t have to climb down as in the ladder case. The pole is quite versatile: You can attach either a roller or a brush to one end. You may feel a bit tired wiping the pole all the times though.

equip-yourself-with-suitable-protective-gears

Finally, believe it or not, the choice of paint is very important as well. When you can’t comfortably reach the painting place, the paint may start dripping down or splattering. If these keep up then you may find yourself painting the walls over and over again. To save you the hassle, pick high – quality paints from the beginning. Paints with thick constancy will stay right where you apply them.

When the preparation is good, let’s get into work

The painting process

•Step 1: Prepare the painting space

It’s vital that you cover everything around your painting project. If possible then try to move them away to make room. In case that they are too heavy, cover them with cloths or newspapers. This will protect them from all dripping or splattering paint. Take down any hanging or decorative you may have on the walls. Do the same with lights and fans. Remember to shut down their power source first.

Prepare-the-painting-space

Via http://modishspace.com

Next, wash the walls with warm water and mild detergent. The paints will have a better bond with the walls if the surfaces are clean. Wait for them to dry then move on to the next step.

•Step 2: Prime the walls

Primer is a resin – rich adhesive. It strengthens the bond between the paint and the wall. The durability of the paint will also increase accordingly. That is why this step is essential in the painting process and you shouldn’t bypass it. To high walls, the priming layer will reduce the possibility of paint dripping down on your head. You can apply it in the same manner as the paint.

•Step 3: Paint the walls

you need to start painting the wall at your leisure

Via greyhouseharbor.com

After priming the walls, it’s time to paint them. Dip the roller or the brush inside the paint can, remove the excess then wipe the wall with it. Now, you need to start painting the wall at your leisure. It’s recommended that you use horizontal strokes to better spread the paint. When you approach edges or tights spot, remember to use less pressure. This will prevent the paint from overlapping.

•Step 4: Clean up

While you wait for the paint to dry, you can start cleaning up. Dispose of used primer and paint cans properly. Cleanse your roller or brush with warm and soapy water. If you just store them away as they are, the residual paint and primer will harden them. This means you will have trouble using them later. After you finish rinsing the tools, put them on a warm and sunny place to dry.

If you feel that there won’t be anymore dripping or splattering paint, remove the cloths or newspaper cover. Be careful not to spread the paint on them around. If you did use painter tape, remove them quickly. The longer you leave them there, the harder it is to remove. Take the tape out at a 45-degree angle so you don’t accidentally remove the fresh paint with the tape.

Conclusion

And that would conclude this guide, not too hard to take in, right? It’s good to have a scaffolding when you want to do something above the ground such as painting high walls. But even if you don’t have one, it’s not difficult to look for another way. If you employ the tools and techniques mentioned above, painting high walls is just a trivial task.

Put this article into practice and you shall know how to paint high walls without scaffolding.

How to Drill Into a Stucco Wall Useful Guides by Do It Yourself

The wall surface is really hard. Well, this is probably because the wall is covered by a stucco layer. It’s very durable and if you don’t do it right, the nails won’t have a good grip. Luckily, this article can show you how to drill into a stucco wall on your own.

More…

Introduction

Everyone desires tough and durable walls that can last a long time. But if the wall happens to be too strong, this may be an issue. From mounting a clock to hanging a flower pot, you need to have nails as support. When the wall surface is under a stucco layer, you will have a hard time hammering in the nails.

There is still an easy way to do it and that is to drill holes for the nails. Yet as if you can simply push the drill in, you need to know how to drill into stucco wall. And you can learn just that right below.

how to drill into a stucco wall

Stucco is a special plaster mixture with portland cement as the base. What comes out of it is a thick and tough protective layer for households use. Stucco is mostly used on the exterior wall to preserve them from the weather. You can say stucco is the ultimate construction material. It’s affordable, fire – resistant and cost effective.

To drill a hole through it is quite challenging as well. But with the right tools and skills, nothing is impossible. So let’s see what you will need to do this right.

Tools and gears

Of course, the first thing you are going to need is a drill. A good power drill will save you some serious times and efforts here. In addition to that, you need to have a proper head. In this case, masonry bit is the recommended type. It’s specialized at punching through tough surface so get one that fit the size of your nails.

Next is to prepare a tape measure and pencil to help you drill accurately. Hammer and nail are also necessary. And get a bucket and towels to deal with the debris when you are done.

towels-to-deal

Flying dirt and splinters are what you may encounter here so protect yourself at all time. Put on a pair of gloves, goggles and face mask to ensure your safety. If you don’t familiar with the drill loud noise, get sear plugs as well.

no-pipe-or-cable-run-behind-the-wall-you-intend-to-drill

Also re – check our house insurance terms and conditions. You don’t want it to be voided by mistake here. And make sure that there is no pipe or cable run behind the wall you intend to drill. When everything is in order, let’s go forward with the drilling.

•Step 1: Locate and mark

Swiftly use the tape measure to calculate the spot of each hole. This will decide if your decorative is in a good position or not hence affect their aesthetic value. When the measuring is done, mark the holes with your pencil to assist the drilling later on.

Be careful not to let the holes too close to each other. They may crack when you drill or hammer in the nails. Try to keep a suitable and equal distance between the holes.

•Step 2: Insert the masonry bit

Put the masonry bit into the power drill and tighten it. You must take into account the size of the nails before you do this. An appropriate masonry bit will give your nails a better fit into the wall. If the bit is too small then you may have to force the nails in which may crack the wall.

the-masonry-bit-into-the-power-drill

If the bit is too big then the nails will be loosed and fall out easily. So it’s vital that you select the suitable bit. Use a caliper if you have one to determine the correct option.

•Step 3: Start drilling

Put the drill against your mark on the wall and get ready. Hold the drill as tight as possible and firmly push it forward. Now slowly squeeze the drill trigger. Next thing to do here is to gently and steadily push the drill forward.

Remember not to push the drill in too hard or the wall mat crack. Only push in the drill after you feel that there is no longer any resistance. Repeat till you reach the desired depth.

slowly-squeeze-the-drill-trigger

While you are drilling, you should stop after every 3 – 5 seconds to inspect the hole. This will help you determine the hole depth and check if there are any unusual things in there. In certain case, you may run into wire meshes.

These may stumble your drill around and crack the wall interior so be careful. When you see any wire mesh, stop drilling and pull them out completely before continue drilling.

•Step 4: Process the holes

When the holes are in place, you can just hammer in the nail yet, you must clean the holes first. Blow out any remain dirt and debris in there.

After that, apply a thin layer of stucco caulk into the hole interior. Wait for one or two hours then push in a nail anchor. The caulk will hold the anchor tightly in place so you can casually punch the nails in them later.

push-in-a-nail-anchor

•Step 5: Hammer the nails in

Now, simply hammer in the nails you and that would be it. Still, pay utmost attention and don’t use too much force here. You may break open the recently added caulk and that won’t be pretty. So just use the right amount and punch the nail in.

When the nail fits into the anchor, you should stop right away. Now all you have to is to hang the decorative onto the nail and wrap up. Clean up the scene and put all the dirt and debris into the bucket then throw them out.

Conclusion

End of the guide, fairly simple to follow, right? Stucco is a wonderful choice to protect your wall from the weather. But when you need to nail something into the wall, it’s quite an obstacle.

However, if you possess the right tools and follow the procedures above, it’s really not that hard at all. You can do this entirely on your own. Just focus on what you are doing and everything can be done before you know it.

Is the article help to your case? If so then please give It alive, comment and share the article with your friend.

3

Helpful Instructions on How to Disconnect a Gas Dryer

So you plan to replace your gas dryer, perform a maintenance on it or just want to shut it down completely when you go away for sometimes. Well no matter what is your reason, you will have to disconnect the dryer from its source. This won’t be a simple task, especially when you are not a professional. But this is not entirely impossible.

More…

Read through the article and you can get several useful hints on how to disconnect a gas dryer.

How to Disconnect a Gas DryerIntroductionThe required tools and gearsThe disconnecting processStep 1: Shut down the gas dryer.Step 2: Disconnect the dryer from the gas supply line.Step 3: Ventilate the place and clean up.Conclusion

Introduction

If you want your clothes to dry faster without having to hang them on a spacious and sunny place then getting a dryer is a good choice. And if you also desire a dryer that doesn’t strain your house electricity grid then a gas dryer would satisfy this condition.

But if you ever want to fix and update the dryer model or want to shut it down before going on a trip, you will need to completely disconnect the dryer from its gas source. Don’t know how? Well take a look below and you can learn it, here and now.

completely-disconnect-the-dryer-from-its-gas-source

Most clothes dryer work in a more or less the same fashion: Bring the air in, warm it up and lead the hot air through the container to dry the clothes then push the air back outside. As the name suggests, gas dryer employs gas as the way to create heat. While slightly more efficient than electricity dryer, gas dryer did have its shortcomings.

One of them is a tricky way to disconnect it. But if you really want to do it then this article will show you how to disconnect a gas dryer safely and by yourself. First, let’s take a look at what you need to do this.

The required tools and gears

You won’t need any specialized tools here, just the usual stuff in your box. Generally, you will need a wrench, a screwdriver and duct tapes. If possible then you should select a screwdriver with a suitable head.

It will give you an easier time unscrewing the hoses and you can tighten the whole thing back later with little trouble. And you should also prepare a fire extinguisher just to be safe.

unscrewing-the-hoses on how to disconnect a gas dryer

Due to the possible presence of leaking gas, explosion and fire hazard, you will need to equip yourself with appropriate protective gears. So get yourself a pair of goggles, gloves and face mask. Remember to open all the doors and windows in your house.

Also put down all heat sources, flames and pilot lights since they can ignite the gas residuals escaped from the pipes when you disconnect the dryer. It’s vital that you ensure the areas surround the gas dryer to be well – ventilated at all time.

The disconnecting process

Step 1: Shut down the gas dryer.

Make sure that there are no clothes inside then turn off the gas dryer and unplug it from the outlet. Open the dryer container to remove any lint from the dryer lint screen. Next is to wait for approximately 30 min to make sure that there is no gas left in the dryer then proceeds to shut down the gas supply pipe.

You can choose to close the section valve next to the dryer or just turn off the main gas source for the house. Only proceed to the next step only when you no longer smell any gas.

turn-off-the-gas-dryer-and-unplug-it-from-the-outlet

Photo via http://www.structuretech1.com

If possible, do check around for gas leakage around your house too and seal them with the duct tape. The best way to prevent accidents when it comes to handling gas – involve machine is to make sure that all leakage must be seal as soon as possible.

You can ensure this then there is nothing to worry about. All you need are patient and concentration.

Step 2: Disconnect the dryer from the gas supply line.

Locate the hose that connects the dryer with the gas source then takes it off. You can remove the house by using an adjustable wrench. There are also types of gas dryers that employ additional ways to secure the hose such as extra screws or sliding bolts, take care of them as well.

But just before you about to yank the hose out, quickly grab the duct tape and slowly take the hose out. The moment the hose is exposed, swiftly covers the mouth with layers of duct tape.

Disconcert-the-dryer-from-the-gas-supply-line

Photo via https://www.youtube.com

When the hose is properly secured, gently fold it back and tie the hose to the supply pipe. It’s also worthwhile to check the material that made of your hose now. If it’s a silver or white vinyl, do replace the right away with an aluminum hose.

Vinyl is really flammable and can be easily ignited. This is for the safety of your house and your family so pay attention. If you choose to replace the hose then also yank it off the supply pipe and re – apply the duct tape, this time on the mouth of the gas supply pipe.

Step 3: Ventilate the place and clean up.

No matter how fast or careful you are, chances are some gas has escaped from the pipe or the hose into the room when you remove them. Just to be on the safe side, don’t close down the windows and doors just yet.

Ventilate-the-place-and-clean-up

Photo via https://www.youtube.com

Leave everything open for a couple hours so the gas can flow out of the room then proceed to the cleanup. Pick up every scrap and piece of rusts or rubbers and throw them out. Do remember to keep the screws and the hose tightening rings so you can reconnect the gas dryer later.

In this part, if you see any holes or cracks on the hose and pipe then no matter how small or insignificant they are, replace them right away. One more time, your number one priory is the safety of you and your family, now and in the future. So if you see any abnormal sight, don’t need to hold back and head straight to buy new, quality replacement.

Conclusion

And that is the end of the guide, have any trouble following it? Gas dryer is a useful machine that can save a lot of time and effort. But it when you need to disconnect the dryer from its gas supply for a maintenance or replacement, it’s surely not an easy job and may even get dangerous.

But as long as you follow the instruction above precisely, use suitable tools and completely obey the safety advice then everything can be done with ease.​

Is the article helpful to you? If you feel so then please like, share and comment to show your thinking.