Archive

Category Archives for "FURNITURES"
18

Best Sanders for Wood Furniture on The Market For You in 2018

Sanding wood is a tenuous task without the proper tool. Check out some of the best sanders for wood furniture around to assist you.

More…

Introduction

Wood furniture is an excellent choice to give your house interior a classic and natural look. However, after a certain period of time, its surface wills no longer stay smooth and need to be sanded. This is a process that cannot be rushed and must involve suitable tool to preserve the furniture aesthetic value. Thanks to the advance of technology, now we can get power tool to assist us in sanding any surface. In this case, you can take a look at some of the best sanders for wood furniture right here. Couple with helpful information about sander types and their usages, sanding might appear to be much easier to you now.

Sanders styles and techniques

Electric sanders have considerably simplified the sanding process and shortened its time requirement. As long as you can pick the right type of sander and appropriate abrasive, you can sand almost all type of surface. Details and specification about 3 common styles of sander can be found down below.Be warned that while most sanders got their own dust bag, wearing protective while you are sanding is mandatory. There will be a lot of dust, splinter and even pain vapor involved here so be careful. Keep the room airtight to prevent the spreading of these things to other parts of the house.

•Belt Sander

When you want to sand large, flat and rough surface, the speed and of the belt sander will serve you well. This powerful tool utilizes abrasive cloth in its sanding belt and runs that in constant loops. There is also an adjustment knob for you to track and center the belt by turning it any way you want.

To wood surfaces, the belt sander is very good at dealing with flat boards and narrow edges. You can even try to arrange the boards together to sand their edges at the same time for better results. Do remember to keep the sander moving at all times, you may create a wedge or a depression by standing still. The belt sanders usually come in 4 sizes which is the nominal standard. They are 7.62 x 45.72, 7.62 x 53.54, 7.62 x 60.96 and 10.16 x 60.96. This is the size of the sanding belt that the sander can accept.

•Orbital Sander

Light, quiet and very easy to control with just one hand, this sander style is perfect for low – intensity sanding. It’s relatively docile and stable so you can use it to carefully sand the wood furniture with no issue. You will see that it’s nearly impossible to damage the sanding surface by mistake with this sander.

The orbital sander primary purpose is to sand the wood surface to ultra smooth, rounding sharp edges and substance removal. From hardened putty to coating and paint, you can get rid all of them by this sander. On the other hand, it’s not effective when the task requires lengthy sanding or stock removal though. Many people tend to call the orbital sander a ¼ sander because of the size of its sandpaper. It can be used with a ¼ of a sheet of the usual 22.86 x 27.94 sandpaper piece. The sander clamps the sandpaper on the pad and when it vibrates, you can sand in any direction.

•Random Orbit Sander

Stay in between the belt sander and the orbital sander is the random orbit sander. The random orbit sander construction and design are similar to the orbital sander. One notable exception is that it uses a round pad instead of a square pad.

This sander can fulfill any tasks of the previous sander styles to some degrees. It won’t be as fast as the belt sander and harder to control than the orbital sander but it’s versatile. If you only want to get one sander, consider getting a sander with this style as your primary sanding tool. Same as the orbital sander, you just need to attach a piece of paper into the pad before start sanding. Popular random orbit sander pad sizes consist of the 12.7 and 15.24. For household use, the 12.7 version will be more than enough.

Top 5 Best Sanders for Sanding Wood – 2017

1/ Dewalt D26451K Random Orbital Sander

Via Amazon

Check Price & Review on Amazon

  • Size: 13 x 9.5 x 6.75 Inches
  • plusList ElementMotor: 3 Amp
  • plusRPM: 12,000
  • plusStyles: Random Orbit Sander

Smooth operation and clean finish, the Dewalt D2645K is a wonderful sander, especially when it comes to sanding wood furniture. An ergonomic handle and compact body make it relatively easy to use. At 3.4 lbs, Dewalt D2645K is light enough for you to use for quite some time with minimal fatigue.

This sander come is with its own dirtbag which got a generous capacity and simple disposal procedures. Its dustproof switch prevents dust accumulation and increases the product lifetime. The sanding speed is regulated by the Controlled Finishing System that helps you to avoid gouging the surface when starting. If you want something basic, versatile and tough, you can hardly go wrong with this one. 5 Inches and 8 Inches hole hook will work just fine with the sander. Its sanding disk can be turned back and forth effortlessly so you can maintain the working efficiency use the right grit

Pros:

  • Affordable and simple to use
  • Robust construction and accept a variety of attachments

Cons:

  • Not ideal to use for an extended period of time
  • The speed cannot be adjusted though it reacts well with different level of pressure
  • The dust bag quality can use some improvement

2/ Makita XOB01Z Random Orbit Sander

Via Amazon.com

Check Price & Review on Amazon

  • plusSize: 5 x 8 x 3 Inches
  • plusStyles: Random Orbit Sander
  • plusRPM: 7,500 – 11,000
  • plusVoltage: 12 Volt

As a cordless sander, the Makita XOB01Z runs on a pre – charged battery which allows you to use it wherever you want. When fully charged, you can use this sander for 20 to 40 minutes, depend on the speed setting. Sanding speed can be adjusted with a single tough electric switch to match the sanding requirement.

The sander handle fits well within the user’s hand and improves operator comfort. Its quick change hole hook allows immediate replacement of worn out sandpaper. The pad filter efficiency is respectable and would keep your working space relatively clear of dust If you want something that doesn’t require an outlet to work, the Makita XOB01Z will serve you well. The limited running time makes it more suitable for short sanding project. You can always purchase more batteries and charge them all for continuous uses though.

Pros:

  • A portable sander that can be used anywhere
  • Variable speed to fit customer need
  • Great endurance for its cost

Cons:

  • A rather short running time with 1 battery
  • Both the charge and the battery are sold separately from the sander

3/ Makita 9403 Super Duty Belt Sander

Via Amazon.com

Check Price & Review on Amazon

  • Size: 5.51 x 13.9 x 8.31 Inches
  • plusStyles: Belt Sander
  • plusRPM: Adjustable with speed dial
  • plusMotor: 11 Amp

Another great product from Makita, the 9403 is a strong sander for heavy sanding works. Its impressive motor strength can easily deal with even the roughest wood surface without trouble. One thing that might surprise you is that this sander can do that while remaining rather quiet

At 13 lbs, 9403 is a rather heavy sander but its thoroughly angled handle permit easy movement. Due to the weight, it would be best using it to sand horizontal surfaces than vertical ones. The insulation is done well so you won’t feel any notable heat while using the sander.For dust disposal, an exhaust fan blows any dust residual from the sanding down to a cloth bag. The cloth bag can be detached in any way you want thanks to it rotation design. While there are specialized seals to keep all the dust out, a pair of goggles or mask is still needed nerveless.

Pros:

  • Very strong motor
  • Little noise
  • Convenient to move and sand with precision

Cons:

  • Heavy
  • Quite expensive
  • The cloth bag may not able to catch the smallest of dust particle

4/ Black & Decker BDERO100 Random Orbit Sander

Via Amazon.com

Check Price & Review on Amazon

  • Size: 7 x 5 x 6 Inches
  • plusStyles: Random Orbit Sander
  • plusRPM: 14,000
  • plusMotor: 2.6 Amp

Can be said to be among the cheapest sanders around, the BDERO100 get the job done with just a small investment. This sander can accomplish most of the sanding tasks though it’s kind of noisy. The handle is a simple design but still decent enough to give you a good grip.

If you feel that for such a price, the quality must not be very good. Well, the sander did have ups and downs but generally, its performance is still sufficient to meet people expectations. It remains simple to use and totally worth the costAbout the dirtbag, it could have been done better. The dust may escape in small amounts while you are using the sander. Its switch may also need to be firmly held for a bit for the latch to catch on

Pros:

  • Very affordable
  • Perform excellently for its cost
  • Light enough to carry around in your bag

Cons:

  • The speed is fixed and kind of slow in certain situation
  • Can leave out plenty of dust

Conclusion

And that would be some of the best sanders for wood furniture on the market, see anything you like? Sanding with your hand will take a lot of time and may not have the desired results. With a powerful tool like the electric sander, you can finish the entire process in a blink of an eye.

How to Sand Concrete Floor | Tips and Tricks on DIY

So you want to do something with the ugly concrete floors in your house. Time can slowly degrade anything include concrete surfaces. Naturally, you will look a solution to improve the floors. Applying a layer of pain or coat may solve the trouble but you can’t do it right away. You need to properly process the floor first. And you can do just that by learning how to sand concrete floor through this article.

More…

Introduction

Thick layers of dust and dirt will eventually form on your concrete floors. In order to ensure your family well-being, you must quickly deal with them. Not only they are harmful to people health, they can considerably reduce the house aesthetic value. Usually, concrete floors have layers of paint or coating on top of them. They are the concrete protective. When the protective layers are no longer around, you must process the floor surfaces before reapplying them.

paint-or-sealer-as-a-preservation-measure

Generally, the surfaces of concrete floor are very porous. This is why people coat them with paint or sealer as a preservation measure. Slowly yet steadily, the coating will deteriorate and wear off. Before you can recoat them again with protective, you need to process them which sanding is a popular method. And if you don’t know what to get or where to start, you can find all of that right below. Follow them and you will find this to be an easy job.

Preparations

As the name suggests, in this method, you will need some high – quality sandpapers. Do avoid using sandpapers with coarse grits since they may scratch deeply into the concrete. You can use sandpaper on your own but it’s advised that you get an electric sander to be more efficient. Besides that, prepare a cleaning solution, a bucket and a mop. Also get a few nylon bags to assist with the disposal at the end.

There will be a lot of dust and chemical involved so protect yourself. Put on a pair of goggles, gloves and face mask or respirator when you deal the floor. For the coating, select whatever suits you. You can also get plastic sheets to protect sections of the house from dirt and dust. In case that there are doors and windows, simply shut them tight when you are in the process of sanding.

When you got everything, let’s get into it.

The process

•Step 1: Clear the space and wash the floor

Promptly remove any furniture of anything that may get in your way in the sanding space. Next, sweep the place and get rid of any debris on the surfaces. Remember to keep your gloves on at all times to prevent possible scratching. Next, mix the cleaning solution with warm water in the bucket then start mopping the floor. After a minute, re-rinse the mop with the mixture from the bucket and proceed to cleanse the floor again.

Repeat the process till you completely cleaned the floor. This will allow the later sanding process to proceed much easier. The coating will also have a better bond with the concrete if you invest time and effort in here.

•Step 2: Sanding the floor

Wait for 3 days till the humid is completely gone then take out the sandpaper. No matter if you use the electric sander or just your hands, the principle is the same. Simply sand the entire concrete floor back and forward. This will create a large amount of dust and dirt so keep your face protections on. Beside debris, you may also find the remains of the previous coating, get them out as well.

Sanding-the-floor

Once in while, exam your sandpaper and replace it with a new one if you saw that the paper had become smooth. Keep sanding till the concrete surfaces are ready for new coatings.

•Step 3: Clean out the residual

When you have successfully sanded the floor, it’s time to dispose of all the dirt and dust lying around. Grab a vacuum cleaner and sweep the place with it. Try to check the cleaner bag frequently so you don’t overflow its container. When you are done, take out the mop and the bucket and cleanse the entire place with the cleaning solution again. This is enough to get rid of all the debris that escaped the vacuum cleaner.

Finally, neatly wipe the concrete surfaces with a cloth and let them dry completely before proceeding to the next step.

•Step 4: Fill out the holes and cracks with primer

It’s very likely that your concrete floor would have uneven surfaces with cracks and holes by now. Before you can actually apply the coating, you need to flatten the entire place first. Therefore, it’s a good idea to start priming the floor. Take a roller and apply primer across the floor. It will cover the void and gap of the concrete while also provide a better bonding with the later coating.

Insert Image

•Step 5: Apply the coating

If you see the primer has taken its place among the concrete, now is a good time to add the coating. It’s recommended that you add 2 layers of coating and you must wait for one to dry before you add another. Use slightly overlapping horizontal strokes to spread the coating and remove the excess. When you approach corners or tight spots, you can switch to a brush to better apply the coating

•Step 6: Clamp in the masonry sealer

As usual, wait for the all the coatings to dry before applying the sealer. This will help to preserve the coating and press them tightly onto the concrete. The applying method is just like when you prime the concrete. Take the roller and apply as many layers of masonry sealer as you want. Of course, you still have to let each layer dry completely before putting on another. Your concrete should a new and improved appearance when everything is done.

Conclusion

And that is the end of this article, fairly easy to take in, right. Sanding concrete floor is easy, even for a first-timer. As long you can get the correct materials and proper tools, it can be done. If you dislike the look of your floor, why don’t you give it a better one? You can do that with a minimum cost if you got a firm grasp on how to sand concrete floor. The entire process is essentially a trivial task. Concentrate and stay on guard are enough to turn your ugly floor into something you can feel proud of.

How to Remove a Fireplace Insert | A Quick and Simple Guide

Everything has its own life time, same can be said about the fireplace insert. When the time comes, you will have to get it out and put in a new one. This is not very easy to when you are not a professional. But even if you are completely clueless, no need to worry. Take a look at this article and you can learn how to remove a fireplace insert by yourself in no time.

More…

Overviews

So you have been noticing several problems with your fireplace: Leakage, lack of heat, too much smoke, etc. These probably mean that your fireplace has reached its final days.

The obvious thing to do next is to replace it. But first, you will need to get the insert out without damaging the surrounding. This may get a bit tricky. Yet as long as you use the right tool and apply suitable techniques, it can be done.

how to remove a fireplace insert

Models of fireplace usually employ two ways to create heat: Gas and wood. Each of them has its own unique removal process. It’s vital that you apply the correct one in order to avoid potential hazards. Every fireplace, especially the insert contains lots of heat.

Naturally, it’s would be wise to know how to remove a fireplace insert first than improvising as you go. Lucky for you, this article can show help you with that. First, let’s see what you need to have here.

Tools and gears

Removing the insert will be a laborious task so prepare yourself. For the most part, a crowbar, a wrench, a knife and a screwdriver will be sufficient. You may also need a bucket and a brush to clean out dirt and debris accumulates in the insert.

And it’s a good idea to close the window and door in the fireplace room. You don’t want the wind to spread the ashes all over your house. Get a bottle of water in your reach as well, just in case things take a turn for the worse.

a-bottle-of-water

Since you are dealing with potential heat and plenty of dirt or rust, protection measures are mandatory. Generally, you should put on a pair of gloves, goggles and face mask. One more important thing to do before you attempt the insert removal is to check the insurance terms and conditions.

The process of removing the fireplace insert may involve tearing down parts of the proximity walls. That action may void the warranty so be careful. Other than that, let get right into it.

The removal process

This part will be divided according to types of fireplaces: Gas and wood. Determine the nature of your fireplace and follow the suitable procedures. Pay utmost attention and stay alert at all time. Old insert is not exactly as safe as when they are installed so don’t risk anything.

Your safety is the top priority here so when you encounter something unusual, stop and look for help at once.

The wood fireplace

•Step 1: Determine the conditions

how-to-remove-a-fireplace-the-wood-fireplace

Fireplace inserts can be installed in two fashions: The interior wall and the exterior wall. The removing principle is the same but if you need to know what on the far side of the insert. This information will help you to consider what is the direction you are going to remove the insert.

A good decision may reduce the damages to the surroundings to the minimum. Get it wrong and you will make a giant mess out of everything.

•Step 2: The front or the back

Now, this is when the information from the last step comes into play. If your fireplace insert is built into the interior wall, your best solution is to get it from the back.

You only have to deal with the drywall in this case. In the other hand, if your fireplace insert is built into the exterior wall, the front would be the better choice. This may entail you to remove parts of the wall.

•Step 3: Get the insert out

Get-the-insert-out-on-how-to-remove-a-fireplace-insert

Photo via younghouselove.com

No matter your choice of direction, it’s time put in some force. Make sure the fireplace is not in operation for at least 6 hours then start creating an access.

After you have done cutting or prying your way in, there should be several connections right in front of you. These should consist of bolts, screws and wires, remove all them of them.

Swiftly pull or push the insert out. Clean out the ashes and dirt then you are done.

The gas fireplace

how-to-remove-a-gas-fireplace

•Step 1: Cut out the gas

This type of fireplace is a bit more complicated compared to the wood fireplace. The distinct feature of this type is the gas pipe. It’s vital that you disconnect the gas pipe from the insert first before you do anything else.

Locate a nearby valve and turn it off or just shut down the house main gas source. There must be no flow of gas into the insert while you remove it to ensure your own safety.

type-of-fireplace-is-a-bit-more-complicated-compared-to-the-wood-fireplace

Photo via https://i.ytimg.com

•Step 2: Cut out the edges

Nearly all gas fireplaces employ plastic or light metal edges. They are to give the insert a better fit within the wall and you need to get them out. You may follow the same guide as with the wood fireplace here to devise the best direction to do this.

But as always, be careful not to sever the gas pipe that connects the insert with the gas supply. For now, you only need to get a space to handle the insert secure mechanism.

•Step 3: Seal the pipe and get the insert out

When you get a comfortable access to the insert, promptly deal with any things that hold the insert and the wall together. Next thing to do is pull out the pipe. The insert is usually covered by thick glasses at the front so you need to readily cover the holes.

Do the same with the gas pipe so as not to let residual gas from them escape into your house. After that, swiftly ventilate the room. This is to get rid of potential gas accumulation created when you removed insert.

Seal-the-pipe-and-get-the-insert-out

Conclusion

And that pretty much wraps up everything, not that hard to understand, right? In order to replace the fireplace, you need to get the insert out and that won’t be simple. But as long as you know how to remove the fireplace insert then it’s can be done with minimal damage.

The most important of all is to use the right tools and apply the right skills along with absolute attention. If you can ensure that then you can do this by yourself quickly and safely.

Is the article helpful to you? Like, share this with your friend and comment to give us your opinion.