Category Archives for "HOME IMPROVEMENTS"

10 simple painting tricks for the perfect home interior

Right in this article are 10 simple painting tricks for the perfect home interior, follow them to have a smooth project. These tricks would help you to cut down the cleanup time by half and substantially extend the paint job lifespan. However, there is no need to strictly obey the information down below though, feel free to incorporate adjustment if needed.


  • 1/ Clean and prepare the panting surface   


In order for the paint to adhere properly, you must clean the painting surface and remove dirt, mildew, grime, etc. You could use a power sprayer to perform the task but a stiff-bristle brush should be just as effective. Fill any hole and crack you can find with putty, wait for the material to cure then sand it flush.


Usually, you should be able to paint over an already painted surface if the old paint is in good condition. But if the old paint has flaked off or blistered in several spots, you have to scrape them off beforehand. In the case the painting surface is made out of wood, it would be a good idea to use primers.


  • 2/ Use a combination of brush and roller


A short roller is the best tool to paint over large and long surfaces so make sure you have one. When it comes to panting narrow edges and tight corners, a compact paint brush would prove to be exceptionally handy.  With a roller and a brush by your side, you finish painting the interior in a blink of an eye.


Do remember to take care of them by washing away all the paint residues on the body of the tool. To leave these tools soaking in paints would make it hard for you to use them in time of need. The paint would freeze them solid after some time and it’s quite a tedious task to unfreeze the tools.


  • 3/ Mix a couple of paint can together to keep the color consistent


The color of paint could vary slightly from can to can and the difference could be annoying in certain cases. Therefore, grab a big bucket and add in there several cans of paint, it would quickly solve your color problem. You could always pour the leftover paint back into the cans for later usages so just add as you like.


The amount of paint to use should be estimated by using a process called boxing which utilizes 5-gallon buckets. For extended paint jobs, it’s often advised that you should use a roller screen instead of the usual roller tray. The roller screen permits the painter to quickly load the roller, and as a result, cut down the painting time.


  • 4/ Avoid ugly lap marks by rolling the full height of the wall and maintain a wet edge


Lap marks form when you happen to paint over portions of the paint that are already dry for some time. It would leave unsightly stripes on the paint job and that is a common issue with quick dry latex paint. Luckily, there are a couple of simple methods you could apply to prevent the forming of the troublesome lap marks.


Keep the roller loaded for the duration of the project, reload it regularly so the roller never gets too dry. Move the roller up and down in the manner that let you completely cover the full height of the wall. To keep a wet edge, each of the strokes must properly overlap the previous ones before the paint could dry.


  • 5/ Let the paint dry before you start cutting the painter tape


Wait for a day before you attempt to remove the tape, do it early and you may mess up everything. And don’t yank the tape off by force alone, you have to cut it lose first and do it gently. Slice a knife between the tape and the paint as you pull the tape off at a 45-degree angle.


  • 6/ Paint the trim before the ceiling and the wall


Following a logical order allow you to paint the interior effectively so start with the trim and then everything else. Compared to the ceiling and walls, it’s much easier to paint over the trim and then remove its painter tape. That is why you should finish processing the trim and wait for it dries before moving on to other surfaces.


  • 7/ Use cotton cloths as covers


No matter how careful you are, you may still accidentally spill or splatter the paint so you better come prepared.

Tape a couple of cotton sheets together and lay them on the floor to set up a convenient nonslip surface. In the case you don’t have cotton cloth on hand, rosin paper would be an excellent alternative for paint cover.


  • 8/ Paint along the edge to keep a consistent texture


People often paint corners and areas around the trim using a brush which leads to the forming of unique textures. To keep the texture consistent, you have to roll over these spots with a roller before the paint could dry. Handle the roller as careful as possible and don’t let it bump into the opposite paint surface or the trim.


  • 9/ Feather out the paint where you are unable to keep a wet edge.


When you could not cover the painting surface properly in continuous strokes then it’s best to feather out the paint. That would allow you to efficiently minimize the build-up of excessive paint and lap marks as well.


  • 10/Sand between each coat of paint for a smooth finish


Should you wish to apply multiple coats of paint then you must remember to sand between the coats. Wait for the paint coat to dry then sand the place with fine-grit sandpapers before applying the next coat.

How To Drill A Hole In Ceramic Tiles Without Damaging Them

Ceramic tile is commonly used on the house wall, floor and alike due to its excellent characteristics as a covering material. However, it’s rather delicate as well, if you handle ceramic improperly then you can end up in a nasty mess. Drilling and cutting ceramic tile are tasks which require a lot of patient in order to achieve the desired result.

Read more

J5 Tactical Flashlight Review: All You Need to Know in 2018

Are you curious about the quality of J5 flashlights? Then you should check this J5 tactical flashlight review we made!

Tactical applications require more than the usual preparations. Aside from your main gears and skills, you should have all the necessary amenities that can withstand those dangerous and perplexed pursuits.


Typically, most of para-military and search-and-rescue operations happen at night or in areas that have poor visibility. Your eyes can’t keep up with these conditions anymore. In such condition or event, you really need the assistance of a specialized and reliable flashlight.

Among all the tactical flashlights in the market today, the J5 Tactical is a resounding name. It is a world-renown light-emitting body that can produce optimal visibility through high-lumens production. Moreover, many people told that this particular flashlight is utterly durable, making it a great option for harsh terrains and weather conditions.

But are all these claims right? Well, we are here to find out. If you want to know the real score of this unit, better check this J5 tactical flashlight review.

What Makes a Tactical Flashlight Great


Of course, none of these would make sense if we don’t know the key factors that determine the quality of a flashlight. Some of you think that as long as the flashlight can produce bright illumination, it is already okay. Well, that it is a big mistake. You have to remember that we are talking about tactical flashlights here. They should be far different than your ordinary household flashlights.

If you are going to judge the J5 Tactical flashlights, we should know first what to rate. The following section will give you a clear idea on how to do this.

Output of Light

This factor is a basic. The light output of a flashlight gauges in lumens. Some call it the brightness of the light. But the truth is, lumens tells you to the intensity of the light being emitted by the light source. Technically, it is the maximum light output that a flashlight can give when operated by a new pack of batteries.

Although it is true that it is one of the primary considerations that you should mull over, the light output is just a piece of a whole. An ideal tactical flashlight should go beyond 300 lumens. Some could even reach 3000 lumens, which is insanely bright already.

Beam Range

As we mentioned earlier, the brightness of the flashlight is not the only stone you can throw. Regardless how bright the light is, if it cannot reach far, it is pretty useless. Take note that we are talking about tactical flashlights here. The beam distance matters to them. Spotting your target even they are far can change the entire complexity of your pursuit.

Battery Time

Another thing that a tactical flashlight should have is a long running time. Considering that you will stay on the field for a long time, the flashlight should be able to keep up, too.

You have to measure the runtime of a flashlight in hours. Specifically, it is a rating that indicates how long will the brightness of the light will go down to 10%. The longer the running time, the better. It just means that the flashlight is reliable enough for you.

flashlight-water-resistant-drops J5 tactical flashlight review

Impact and Weather Resistance

You should also pay attention to the construction of the flashlight if you are going to take it on tactical or survival applications. Just remember that these activities usually take place in harsh environments or unfavorable conditions.

You need a sturdy and seamless body that can protect the electronics of your flashlight from water, dust, and other debris. The case should act like as an electrician bag. It should be able to protect your essential amenities from any damages. Also, don’t forget that the flashlight must be rugged enough to survive high-distance falls.

Of course, proper maintenance could improve the overall lifespan of the flashlight!

These are the essential factors that can gauge the quality of a tactical flashlight like the J5 Tactical Series. If this particular brand fails on any of these aspects, it may just end up as an overrated unit. Well, we will about to find out about that one now.

J5 Tactical Flashlight Review

Photo via

In a sense, there is no denying that the J5 Tactical is among the most popular units of tactical flashlights today. Many hobbyists around the world are familiar with this brand. Therefore, it is not a surprise anymore if there are a lot of people who own one or two of their flashlights.

You can see a lot of militaries and law-enforcement personnel utilize these tools on their operations. But of course, homeowners and hunters do find the flashlights from J5 Tactical hand.

Currently, the J5 Tactical features four ergonomic and modern flashlights. Specifically, they are the 732-A, J5 V2, J5 Hyper V, and J5 V1 Pro. All of these units have an excellent reputation in the market. As we scoured through various flashlight forums and communities, we realized that many users do appreciate the electric flashlights from J5 Tactical. In fact, the subreddit “Flashlight” of Reddit has several features about this device.

It is pretty amusing to think that the J5 Tactical flashlights so much recognition. As far as our research is concerned, this flashlight has been a superstar in the industry. Yes. We have seen some complaints about their flashlights. But if you put them into perspective, they are not enough to discourage you. As early as now, we could say that there are no deal-breakers on the flashlights of J5 Tactical.

Okay. We all know that inspecting all the flashlights of J5 Tactical one by one could overwhelm you quickly. Due to this reason, we decided that we will highlight only one unit and reveal all of its features.

Fortunately, doing this measure would not cause too much discrepancy. After all, all of the flashlights from J5 Tactical share common features. Particular units, like the 732-A flashlight, may come as a unique case due to the upgrades integrated into its system.

J5 Tactical V1-Pro Review: A Closer Look

Photo via

It is undeniable that the J5 Tactical V1-Pro is one of the most popular tactical flashlights today. Its performance and features are satisfying enough for various applications such as hunting and military pursuits. Of course, this would not happen if the J5 Tactical V1-Pro can’t show off anything.

One of the most notable things about the J5 Tactical V1-Pro is its impressive running time. Now, we know other flashlights that can longer than this one. Despite this, the J5 Tactical V1-Pro can still outshine them. Why? The answer might surprise you.

You should know that it only takes one AA battery operates this particular flashlight. We were even surprised with this fact. If you are familiar with many high-end LED flashlights, you probably think that such feat is just a bluff. However, it is not.

The J5 Tactical can last for more than a week if you just use it on an average basis. But on long and uninterrupted operations, this flashlight can run for three hours at most. Take note that within this time frame, the J5 Tactical V1-Pro maintains its brightness to the maximum output. With such capability, there is no wonder anymore why people are so impressed about this flashlight.

But of course, this is not the only feature of the J5 Tactical V1-Pro that it can flaunt. You will indeed become amused by its constructions and the things that it can do.

High Brightness Output

Photo via

Let us start this one by stating that the J5 Tactical V1-Pro is a compact flashlight. It is the smallest among all the flashlights that J5 produced. If you are going to judge this item by its appearance alone, you might drop it instantly and move to your next choice. Fortunately, size is never a quality indicator in the world of flashlights.

Specifically, the J5 Tactical V1-Pro can produce an insanely high brightness output of 300 lumens. It can even temporarily blind a person if he/ she will directly look at the light source. Such capability is essential for tactical flashlights. Its brightness and intensity leave no room for error. It excels on night operations, in where the illumination in the moon is not present. There, the J5 Tactical V1-Pro will become your eyes in the darkness.

The brightness of the J5 Tactical is due to the stack of premium diodes that it is using. The integration of the patented J5 LED allowed this flashlight to produce stable bright illumination without taxing its battery too much. With the presence of the convex lens reflector, the torch generates an encompassing and seamless beam of light.

Adjustable Focus

A tactical flashlight is pretty useless if you can adjust its focus. The user should be able to utilize the maximum potential of the lighting. Otherwise, he/ she cannot keep up with different terrains or situations.

At some point, it is proper to say that brightness is not only the thing that decides the quality of the flashlight. If you can control the power of the device, then it is useless. The intended usages for this device will be trickled down.

Fortunately, this is not the story that J5 Tactical V1-Pro tells. The manufacturer was still able to integrate a focus-adjustment feature on the body of this flashlight. Specifically, you just need to the stretch or rotate the neck of this flashlight to modify the size of the beam. With this capability, the J5 Tactical V1-Pro became a versatile option. You can use the flashlight to sight in or cover your target. It is a great deal, especially for police and military hunts.

Extremely Durable and Weather-Proof

Small but terrible. That is the proper description for J5 Tactical V1-Pro. It has an outstanding durability and toughness that only a few among its class can match. After all, structural rigidity is something that the J5 Tactical excels. You will never regret the quality of its construction and built.

The aircraft-grade aluminum used in the body of the J5 Tactical V1-Pro can withstand shock and pressure. It doesn’t get scratches and dents easily, even if you are going to use this device as a self-defense weapon. Well, it is pretty acceptable if you are going to use this flashlight in that way. It is rugged after all. It may not be lethal, but it can certainly knock threats.

You will also notice the durability of the J5 Tactical V1-Pro on its imperviousness to weather and natural detriments. Elements like dust and water could never penetrate the interiors of this flashlight. You can freely take it on rainy days. But we would hesitate on submerging this flashlight underwater for a long time.

Photo via

Check The Lastest Price on


  • checkCompact and discreet design
  • checkExtremely bright flashlight
  • checkTough and extremely durable
  • checkOperated by a single AA battery only
  • check​Low and high strobe modes are available
  • checkAccepts NiMH and Lithium 14500 batteries
  • checkBody is skid-proof
  • checkAdjustable focus
  • checkDecent beam reach
  • checkErgonomic tail-cap switch position


  • minusIt comes with a “dark setting” that you use rarely
  • minusSingle-battery operation makes its run time lesser compared to its counterpart
  • minusYou can’t drown it underwater

What People Are Saying About It

The J5 Tactical V1-Pro is the ambassador of the J5 Tactical series. This particular unit showcases the capacity of this manufacturer when it comes to building survival, tactical, and hunting flashlights.​

So far, we have read that there are a lot of people who are happy with the quality of the J5 Tactical V1-Pro. Those who want a less bulky option has taken a liking on this flashlight. They emphasized that size of the V1-Pro enables them to carry the device inconspicuously.

Apparently, numerous military personnel was also impressed by the quality of this flashlight. With its durability, power, and size, the V1-Pro became the perfect option for fast-paced tactical applications.

Final Verdict

Overall, the features that the J5 Tactical V1-Pro possess just reveal the actual finesse of the J5 Tactical series. Any flashlight guru can confirm this as the V1-Pro is just an entry-grade unit. Models like the 732-A and J5 V2 offer better specs than the V1-Pro. Therefore, we can quickly conclude that the J5 Tactical can cater the toughest needs of the market. They should be included on your shopping list if you are planning to get a tactical flashlight.

It is also important to highlight that the flashlights coming from the J5 Tactical are reasonably priced. We can say that they are not cheap. But at the same time, their price tags are not exaggerated. That is the common flaw that we see with other tactical flashlights. Their cost is quite unproportionate to the quality they possess. But with the J5 Tactical flashlights, you are getting the right perks out of the bucks you invested!

We are hoping that this J5 tactical flashlight review was able to help you decide on what tactical flashlight you should get. Of course, you have the freedom to choose other options aside from this. But just make sure that you should check this flashlight thoroughly before jumping to another boat!

Get to learn other necessary resources and reviews about the latest gears in the market today by subscribing to this site. If you have questions or suggestions, just feel free to drop them in the comment section!

How To Cover Exterior Cinder Block Walls | Clever Solutions to The Question

So you want to do something to those ugly and rough cinder blocks? Well while they don’t look too pretty, they are still the best choice for structure foundations. Due to their durability, they can adequately serve as exterior wall as well. But if you want to raise the house aesthetic value, you have to deal with these blocks first. Want to know how to cover exterior cinder block walls? Well, this article can help you with that.



A house aesthetic lies at its interiors and exteriors. You can only call a house beautiful when the inside and the outside of the house can please your eyes. And if you have basic cinder blocks as your exterior walls, they are an eyesore to you and your visitor. While they are tough, their appearances contribute little if not outright sabotage the house beauty. Luckily, you can find efficient and cost effective solutions for this problem right below.

Cinder blocks are hollow blocks made from concrete. They are affordable, strong and much easier to work with compared to solid concrete. But besides the advantages, cinder blocks are usually dull and unattractive. They look not so pretty when being used as exterior walls in their original appearances. Naturally, you will need a way to “conceal” them. You can learn how to cover exterior cinder block wall simply by reading this article. There are many ways to do this so pick one that suits you.

Step by steps

•Stucco cover

This is a multi – purpose option since you can both cover the wall and add additional protections to the blocks. A plaster mixture with concrete as a base, stucco is a wonderful choice for this job. It’s very easy to apply and totally worth the cost. All you need to do is to purchase stucco cans with a color that fit your taste. After that, just cover the cinder blocks with the stucco in whatever manner you like. But be careful, the stucco will be very hard when they are in place, apply them with consideration.


There won’t be a need fancy tools here, just get a brush, a spade and a bucket. You should clean out the cinder blocks surface of any debris first. Next, spray water on the wall and keep it wet the entire time. Now you have to apply the stucco onto the blocks. Try to keep the stucco spread out with the spade. You don’t want your exterior wall to be littered with bulges so pay attention. When you have finished applying the stucco, let the wall dry for several hrs. At last, your wall shall have a new look now.

•Climbing vines

Want to give the cinder blocks wall a natural look? Then you can add several plants with climbing vines on them. You can pick any type of plants you want. But remember that you need to ensure the plants can fit into the house surrounding. It’s also wise to keep the plant growth in control. If the plant can get between the cinder blocks, the entire wall may crumble someday.


To do this, you need to set up the trellis for the plant vines to grow on. A power drill, hammer and nails will be sufficient for the task. Drill several holes and nail the trellis in place. When you are done, cover the trellis with paint and protective. These will help the trellis to fit in and protect it from the environment. Place the plant pots at the base of the trellis and wait till the day the cinder blocks wall is cover in green.

•Artificial pebbles

A fine way to give the wall a makeover, artificial pebbles gives you lots of freedom in styles and colors. Made to look just like natural stone, artificial pebbles can significantly enhance the wall appearance. While this method requires quite a bit of effort, you can expect the result to be quite a satisfactory one. But just to be safe, only get high – quality artificial pebbles with clear origin. Cheap artificial pebbles may employ harmful chemicals that may negatively affect your health.


You will need a shovel, a spade, biodegradable solution and mortar adhesive. First, dig a 4 inches deep trench along the length of the wall. When you are done, pour down the biodegradable to cleanse it. Damp the trench surface while you erect the pebbles. Remember to secure the all pebbles with the mortar. When the mortar is in, fill the pebbles gaps with grout. Wait for a bit then smooth the grout with the spade or sharp objects. And that is it, your exterior wall will look more exciting than before.

•Set up the fences

If you don’t want to directly alter the wall then setting up a distraction would be perfect. By adding a fence shortly in front of the wall, you can remove attention from the wall itself. You can select fence with theme and material that up to your preferences. If you intend to pick wood or insect attracting material though, you may have to spray them with protective. Do keep the fence high enough to cover the cinder blocks but still allow people to see your house.


In order to have a stable fence, you will need a shovel and a hammer. When you got suitable fences, you need to dig up a trench along the wall. The trench must deep enough so the fences won’t tip over but not too deep that they fail to cover the wall. Hammer down the fence anchors then refill the trench back to normal. Use a damper to level the place and your fence should be ready. You can put extra decorative on the wall if you wish to.

•Oversize paintings

Another way to distract people attention from the cinder blocks without breaking a sweat, simply hangs paintings on them. Get some arts online and print them out. Insert the arts into wooden frames and there you have it, fine paintings to hand on the exterior wall. You can do all of this with some nails, hammer and wooden planks. If your painting is good, people will barely notice the presence of the cinder blocks.


And there you have it, clever ways to deal with the rough cinder blocks, very easy to follow right. Surely all of us want to have a beautiful house at every angle. But it’s not easy to figure out how to cover exterior cinder block walls. Yet you can save yourself a headache by checking out the solutions above. You can find their requirement along with suitable procedures to put them into practice. Everything can be done by yourself and your exterior wall will fit in nicely with your house.

Do you enjoy the article? Feel free to comment to share us your thought, like and share.

Interesting Information for The Question: “What is The Difference Between Interior and Exterior Paint”

Having a hard time to choose between different types of paints for your house? Well, paints can be more or less divided into the interior paint and the exterior paint. The correct choice of paint will substantially increase the house aesthetic value. But if you truly want to know more about what the difference between interior and exterior paint then this article can fulfill your need.



Any one of us wants to have a beautiful home. And paint can help you do that in an economical and effective way. But have you ever think about the difference between the interior paint and the exterior paint? It’s wrong to assume that you can use any paint you want since the needs are unique at each location of the house.


Don’t know if you had used the suitable paint or not? Well you learn about the distinct features of each type of pain right here and right now.

What is the difference between interior and exterior pain? This question seems to be more important nowadays compare to 20 years ago when the paints are interchangeable. The environment, the expose of sunlight, the weather, ….these factors have made the choice of paint is not that simple as it looks like anymore.

Well lucky for you, this article will present you with useful knowledge about that.

The difference in ingredients

• Pigment

the difference between interior and exterior paint

The pigment is what give you can of paint its original color. The organic pigment is mostly used in making interior paint. When being exposed directly to sunlight or the environment, organic pigment tends to shade fast. This will make you have to repaint the wall again and again in a very short time.

This is why you should never use interior paint on an exterior wall or somewhere directly expose to the environment.

• Binder

This is the ingredient used to bind the pigment and everything else together. Exterior walls are expected to deal with the harsh and constant weather so the paint used on it must utilize special binder. Namely, to keep the paint and the wall tightly stick together then prevents the forming of cracks and holes.

use-an-the difference between interior and exterior paint

Photo via

Base on that, it’s very ill – advised to use an exterior paint on an interior wall. You won’t need such options in an enclosed space which can be said to be outright unnecessary.

• Liquid

Depend on regulations, the liquid of the interior paint must contain VOCs at the minimum level. VOCs, or Volatile Organic Compounds, are used as solvents ingredient in paint. They can vaporize base on the temperature and this may cause health problem if use indoor.

VOCs effect may range from short term dizziness to long term liver damage, depending on the exposure. Exterior paint doesn’t have to follow this requirement though since it’s in the open. Another reason why you should not use any paint you like.

It’s also good to know that VOCs did come with an advantage: superior resistant. To put it short, low – level VOCs paints have better endurance than zero VOC ones. So you may want to consider your option well. But in case that you want a little bit of both then it’s ok to pick low – level VOCs paint.

The advance of technology makes the low – level VOCs standard of today the same as zero VOCs standard a decade ago.

• Additives

As mention before, exterior paint has to frontally face the atmosphere and the weather by itself. It’s only natural that it’s got many extra additives in its ingredient list. They will preserve the wall surface while ensuring the paint integrity. But they don’t do as good as the interior paint when it comes to scratching and scuffing, also not very easy to clean and wipe.


Another reason why you should use the right stuff for the right place.

The difference in usage and behavior

• Aesthetic value

Both the interior paint and the exterior carry their own share of the house aesthetic value. But the exterior paint must be a durable layer to oppose the harshness of the outside space. This is why the exterior type is a bit rough and thick which makes it look not that good inside your house.

The color may last longer but it’s not really worth it, especially when you got better option available.

• Out gassing

The added resin in most of the exterior paints will cause a phenomenon called out gassing. Pretty much like the VOCs problem, it’s vital that this won’t happen indoor for safety reason. The out gassing may last for 48 hrs in some case but most will be a slow process over the years.

In addition with the moisture found in walls, it’s essential that you allow the walls with exterior paint to “breathe”, especially in brick walls.


Interior paint also encounters this issue but not in the same fashion. This makes it a good choice for indoor use. You still need to ensure adequate ventilation though, just to be on the safe s side. And no matter what kind of paint you use, a gas mask or face protection is advised.

Create maximum air flow while you paint the wall and keep it like that for a few hours after you are done.

Can we really use this paint in place of the other?

Not that you can’t do this, it’s just generally unwise to do so. Each painting has been designed for specific requirements and to go against that is simply ill- efficient. There is a way to save your trouble deciding a good paint and that is the hybrid paint. This kind of paint got the benefits of both exterior and exterior paint but there is trade offs.

Hybrid stills a fairly versatile paint and an appropriate option for indoor and outdoor walls. Go with this if you don’t to waste too much time deciding what to pick.


And that is the end of this article, is it helpful to you? A correct choice of paint will provide your wall with a protection layer and raise the house aesthetic value. That is why you need to know what is the difference between interior and exterior paint. A good knowledge about this will help you get the suitable choice of paint in your case. And you can find all of them right in this article. Read it well and you can get the paint that guarantees satisfaction.

Do you feel the article to be useful? If so then please give us a like then share and comment.