Archive

Category Archives for "MY HOUSE"

How to Build a Salmon Ladder | An Easy Guide on – Step by Step

Want to set up a salmon ladder to exercise but don’t know where to start? Well you are in luck since this article will offer you a step – by – step instructions on how to build a salmon ladder quickly and safely. With the right tools and suitable techniques, you can finish everything by yourself in no time.

More…

So you are trying to get into good shape but just can’t handle the gym membership fee. Then you decide it’s better and more efficient to set up your own gym right in your house and one of many things you want to set up is a salmon ladder.

It’s not like you are a professional in this field and you have no idea what to get or how to do this at all. Well no worry, this article will tell you how to build a salmon ladder in a very simple manner, that you can understand and apply what you learn right away.

how-to-build-a-salmon-ladder-in-a-very-simple

Photo via https://i.ytimg.com

Salmon ladder is very simple in construction. All you need to is set up a heavy base, put up parallel beam and nail in several sets of hinges then it’s done, grab a pipe then just pumping yourself upward.

Training with salmon ladder greatly improves your hand and upper body endurance. But in order to build a safe and durable salmon ladder, you may need to put in some serious thinking.

Luckily, you can just follow this article to save you the trouble. First, let take a look at the tools and materials you will need.

Tools and materials

The most common model of the salmon ladder is made from woods so you are going to need a lot of planks and beams. The required number of planks and beams will increase according to the scale and height of the salmon ladder.

You are going to need to install a safety device to support your fall since it’s obvious that you will not have a controlled landing all the time. A mat is an effective and economical choice but you can also experience with something else such as net, sand, water. Even a moving support handle that follow you up as you ascend.

Pick the one that you can readily install with little trouble.

the salmon ladder is made from woods

And for the tools, since you are going to do a lot of wood working so hammer, nail, saw and drill are necessary. Besides that, you will need lots of T – shape and L – shape connectors to securely bolt the parts together.

Some form of preservatives is also recommended to protect the wood. Naturally, protective gears are mandatory since you will deal with sawdust and splinters here so remember to put on goggles, face mask and gloves.

The assembling and construction

• Step 1: Prepare the bases

have-a-stable-and-safe-salmon-ladder

Photo via http://i.imgur.com

If you want to have a stable and safe salmon ladder, the bases are where you will need to invest your times and efforts in. There is a variety of way to set up the base but you will need a flat and hard ground first.

Use a shovel or a roller to ensure this.

Next is to put in the base. You can use concrete blocks or dig out several holes then plant in the bases. The distance between holes should be tailored to your body. Ideally, you should determine the distance between the holes base on the gap between your hands when doing pull – up.

• Step 2: Assemble the frame

There is nothing too sophisticated here, just attach the beams and planks together so they form a rectangle frame. Use the connectors and nails to bolt everything as tight as possible. The frame width should be the same as the distance between the bases.

And while you are doing all of this, make sure to keep the wood surface smooth so that you won’t have to fear about splinters. There is a lot of ways you may get injured later when you are exercising on the salmon ladder and.

You surely don’t want to get an infection from splinters.

Assemble-the-frame-on-how-to-build-a-salmon-ladder

Photo via rigorfitness.com

Another important factor to consider here is the body weight. The frame thickness should be increased corresponding to the user weight. Stack several planks or beams onto each other.

If you don’t readily have the parts with appropriate thickness. Make sure to increase the support beam according to the frame thickness as well.

• Step 3: Attach the hinges to the frame

The hinges are where you lock in the pole while propelling yourself upward. You can put in the hinges anyway you want but obviously, the hinges must form an angle equal to or smaller than 45 degrees with the frame so the pole won’t slips away from the frame when you use the salmon ladder.

The preferred way to nail in the hinges is to point them upward in a 20 – 25 degree. This may require you to stride you hand longer to lock the pole into the hinges but it will offer a more secure holding.

you-use-the-salmon-ladder

Photo via http://i.imgur.com

An essential point that you need to be mindful of when nailing the hinges is to make sure the hinges stay parallel to each other as a set and the distance between each set is the same.

Use a tape measure and a marker to help you attach the hinges as precise and logical as possible.

• Step 4: Set up the frame upon the base and install the safety measure

When you are done with the frame and hinges then its time to connect the frame and the bases. Use a combination of drill, connectors and nails to secure the frame and the bases together.

Then the last thing to do is installing the safety feature correctly then you done, your salmon ladder is ready to use. Grab a tough pole then start pumping your.

lf upward on the salmon ladder. Getting into shape has never been so close yet so cheap as now.

Below is a video that should give more tips on how to build a salmon ladder quickly and safely.

Conclusion

And that is the end of the article, very straight forward, right? Building a salmon ladder is an excellent choice if you want to exercise yet can’t afford the expensive fee of a gym.

But for a beginner, this may be not easy to do. In that case though, just gather the material and follow the assembly process precisely as stated in the article then you can build yourself a salmon ladder right in your house yard in no time.

Useful Guide on How to Bleed a Radiator without Bleed Valve

Well you can find a solution to that problem right here and now. This article will introduce to you how to bleed a radiator without bleed valve in a detailed and easy to understand guide.

More…

Introductions

So your room is kind of chilly lately even when your hot water radiator is still running around the clock. But then upon close inspection did you find out that the heat generated by the radiator? is considerably lower than the number you set it to work on?

Naturally, you want to get the radiator back to work as it should be as fast as possible so bleeding the radiator seems to be a good option. Yet the bleed valve looks like not to be present anywhere on the radiator.

In need of a solution to solve this problem? Well this article got a good one for you.

introduce-to-you-how-to-bleed-a-radiator-without-bleed-valve

As the name suggests, hot water radiator utilizes constant streams of hot water to generate heat for your room. The water is heat up at a boiler then goes through a series of pipes to get to each of the radiators in your house then go back to the boiler once again.

After in use for a long time, this loop may be exposed to air and when the air goes through the radiator, part of the air will be trapped inside. Eventually, the trapped air will accumulate to a level that severely reduced the radiator ability to work properly.

This is when you need to use the bleed valve. But no worry if you can’t find the valve anywhere on the radiator, the article will provide you with helpful tips and tricks on that subject.

So that and you can do the entire process by yourself in the comfort of your house, but first lets’ see what you are going to need to have to get the job done nicely and safely.

Preparations

Bleed valve exists on pretty much every hot water radiator and some models just happen to place the valve in unusual position. You radiator valve probably fall into the second group so all you need to do is to uncover it.

Since you are dealing with very hot water here, you must take precaution and equip protective clothing such as gloves and goggles. It’s wise to stay concentrate at all time and apply appropriate techniques that are also shown below. Besides that, a screwdriver and rags are enough.

And just one more thing, check your radiator warranty terms and conditions carefully. You may have to remove and slightly graze the radiator surface to find the valve which may void the contract entirely. This is even more important when you need to replace radiator later so be on guard.

Procedures

• Step 1: Inspection

First, you will need to turn all the radiators in your room and exam them to see how many you need to bleed. The one that got a considerable air accumulation will have cool spots all over the surface.

This is a notable sight that your radiator is eating up energy while delivering little in return. After you have decided which radiator need to be bled, time to shut down the entire system.

wear-protective-when-you-handle-the-radiator

Before you attempt to do anything with the radiator, you better make sure that the temperature is safe to work with. Turn off the valve that connects the radiator to the pipes and also shut down the boiler, just to be safe.

Now you need to leave the entire system completely cool down in a few hours before inspecting the radiator. Again, do remember to wear protective when you handle the radiator.

• Step 2: Find the bled valve and use it

In most models of hot water radiators, the bleed valve is usually located at the top and to the side of the radiator. In order to operate it, you will need to use a bleed key, flat – headed screwdriver or alike.

In order for the trapped air to get out, you need to turn the valve counter – clockwise. After that, you will hear a “hissing” sound of trapped air getting out and when the sound stop. Close the valve and the bleeding is done. There will be water leaking from the valve so use the rags to wipe them off.

But that is the easy part, the hard part comes before that which is to actually locate the bleed valve. As mentioned before, bleed valve may be located elsewhere apart from the top of the radiator. Here are a few hints for you.

Check every corner of the radiator and not just the surface. Detach the radiator to see if there is any “unusual” bolt or screw in or around it. The bleed valve is small and its appearance may fool people into thinking that.

It’s just a normal button or unimportant part of the radiator.

Find-the-bled-valve-and-use-it

Photo via http://www.bestheating.com

If you still can’t find the valve, chances are its cover by a protective layer. You will need to look out for a small and rounded cut on the radiator then try to graze or pry it open.

This should let you access to the bleed valve and operate it. But you need to do one more thing to bring you radiator back to effective operation.

• Step 3: Use the end cap (Optional)

In the rare case that you still can’t find the bled valve then this is the final solution: Loosen the end cap. For this to work you will need to use a wrench. Warp the wrench around the end cap of the radiator, tighten the grip and slowly turn it counter – clockwise.

The moment you the familiar “hissing” sound, stop and wait for the sound the stop. When you see water coming out then the trapped air is finally gone so quickly tighten the cap by turning the wrench clockwise. You are done then just move on to the next step.

wrench around the end cap of the radiator

• Step 4: Pressurizing

When all the trapped air has finally escaped, the boiler pressure must have changed a bit from the usual setting so you need to go there and check. If you see the pressure is not suitable then you have to adjust it.

What you need to do here is to look for the central filling loop. It’s a pipe that connects the boiler to the water source hence you can find it near the boiler. Re – pressurize the central heating – filling loop up to your preference and your radiator efficiency should be good as new now.

your radiator efficiency should be good

Conclusion

And that is the end of this guide, not too hard to take in, right? Hot water radiator is a good choice to create a warm atmosphere in your house, especially in cold weather.

And there is nothing more frustrating than to still feel chilly when you had paid the bill and let the radiator on at all time. To annoy your further, you can’t find the bleed valve anywhere. So you can’t get the radiator back to work as it should be.

Well you can get out of this dilemma simply by reading this article. With it, you can gather the suitable tools and apply appropriate techniques to find and operate the bleed valve all on your own.

Is the article helpful? If you feel so then please like, comment and share it with your friend.

1

How to Make a Deer Feeder: The Best Do It Yourself Tricks

Are you an active wildlife enthusiast? When was the last time you hunted for or took care of a wildlife deer? What equipment do you have that aid you in this activity?

Whether you’re a professional hunter or just someone on a lookout for a new hobby, you will need good gears. Using the right tools is crucial, especially if you are hunting. The thing is, though, having an excellent set of equipment usually requires spending a lot of money.

More…

Now if you are doing this one time or are just at the beginning of your wildlife journey, there is an alternative. Let’s talk about going for a DIY or do-it-yourself.

This article will teach you the basics of how to make a deer feeder—homemade that is. Hopefully, this will cost you less money and will still make the job easier to do.

What You Will Need​

What-You-Will-Need​-How-to-Make-a-Deer-Feeder

As you may already know, the goal of a deer feeder is to just supply food to the animal in the most convenient way possible. The mechanism is expected not to give the deer a hard time. This is the reason why most forest rangers and hunters prefer automatic deer feeders.

But like I said, since it costs a lot of money to purchase the automatic feeder, we are listing down all the things we need to build our own. Since there are a lot of different materials to choose from, we narrowed it down to two.

1. A PVC pipe

The idea is to tie the pipe tightly to a sturdy tree to help gravity do its job. The food will just go all the way down from the top hole to the bottom hole. You may use any size of PVC pipe depending on the size of tree you will be tying it on.

An acceptable minimum size would be a 4-inch. As for the length, you will also have to decide as you estimate the deer’s size.​

​2. A grate and a plug

These tools will help secure the pipe tightly to tree or fence. These will also keep the holes sealed. Specifically, the grate’s job is to drain all possible liquids that might get into the pipe, like rain. This way the foods will not easily spoil.

​3. Ropes

Obviously, this is what you use to tie the pipes. You will need to know the basic sturdy knots to make sure they are placed and locked. You need to make sure you tie it to the tree closest to your viewing range if you are hunting.​

Ropes

4. Buckets or barrels

This is another type of feeding tool you can use in exchange for pipes. This will be more convenient if you are not up for the technicalities of the DIY pipe feeders. You only need a standard-sized bucket that is wide enough for the deer to bow down too.

One advantage of using a bucket is that you will not be wasting a lot of food. The deer get to pace its feeding in it too.​

5. Big plastic buckets​

If you think placing the standard-sized buckets on the ground is too low for it to reach, you may still tie it. Perhaps you can build your fences to try on the pail. Even a 5-gallon pail or container will do.

For other tools that can be used as alternatives, check out these other projects from​ https://joseshome.com/

How to Make a Deer Feeder​

How to Make a Deer Feeder

The following procedures vary as there are different types of feeders you can do. To start off, let’s list down the ones for PVC feeders.

1. Cut or saw the PVC’s. Put the top and bottom together.​

Your desired length must be observed in the cutting or sawing. The length of the pipe where the food will roll down must not be too thin or too thick for the eye at the bottom part. And then, assemble by putting the two together.

2. Place the grate at the bottom and the plug at the top.

As mentioned earlier, these two will help secure the food inside and prevent it from being wet. Make sure both “lids” are tight enough so that even the slightest drop of water does not come through.​

​3. Get the 5-galon bucket and drill holes at the bottom.

These holes must be of the same size. These will be where your broom handle will pass through later on. After drilling, screw two nails at the opposite ends of the broom handle.

4. Insert the broom handle.​

Insert it inside the bucket, passing through the drilled hole. Slide it in place carefully so as not to widen the holes too much.

5. Tie the ropes.​

Do this with one end on the bucket and one on the part of the tree where you are placing the feeder. This will enable the feeder to hang around. Lower down the height between the bucket and the ground to your preference—around 4-5 feet.

Conclusion

There you have it! A quick DIY list of how to make a deer feeder in the comfort of your home. All the tools you will need for these projects are readily available in your local hardware, so you have no excuse.

Now you do not have to worry about where to get good automatic feeders for your hunting game. This is cost-efficient and can also enhance your mechanical creativity. Happy wildlife hunting!​

Make-a-Deer-Feeder-The-Best-DIY-Tricks

How Tall is The Average Door? Get to Learn More About Typical Door Heights

How tall is the average door question is common among those who like to do DIYs at home. We get to discuss more on the question in this guide.

More…

Introduction

When it comes to buying a door, you have to consider many things so as to get it right. The worst can be when your door does not fit correctly in the space allocated. The size of the door comes into play when it comes to fitting the door in the frame.

You have to consider the tallness of an average before buying one. It is the reason we get to look at how tall is the average door at the moment.

For exterior doors

You have to know more about the standard size of the exterior doors if you are going to get one for yourself. The standard size you would get mostly for many houses would be 80 inches by 36 inches. For most newer homes, they would have this type of measurements. Depending on the manufacturer, sometimes you can get the doors coming with a height of 7 to 8 ft and a width of 24 to 42 inches.

How tall is the average door

As for the fiberglass and steel doors, most of them will have fixed measurements of 6ft tall or 8 ft tall.

The French doors

The French doors are becoming quite common among many users. You will find them being used as exterior doors. These doors will still measure the same size as that of the exterior doors explained above. If you are interested in doing some variations, then this is the way to go.

The sliding glass doors

These types of doors are great for those looking to keep their patio doors looking great and still let in a lot of light too. People love installing them as they are the least expensive when it comes to patio doors. Since they are common, you will get many people using them more often on their patios.

The sliding glass doors

The doors will slide in a parallel motion that makes it easy for the homeowners to have an easy time getting in and out of the house. As for these sliding doors for the patio, you will get that they measure 6 feet 8 inches high and 6 feet wide. You can get other different sizes depending on what you are looking for.

The interior doors

It is also important to consider the interior doors. You need to pick something that will better deliver on quality and still give you that perfect fitting that you deserve. For most passage doors, you will get that they have a minimum of 80 inches height with varying width sizes. The width can vary from 24”, 28”, 30”, 32” and 36”.

How tall is the average door

In case you are living with persons with disabilities, then you have to maintain the door width of about 36 inches. It is often noted that the thickness of the door would increase with the increase in the height of the door. Get it right, and you should have no problem fitting the door in the frame.

The closet and utility doors

You will find that the closet and utility doors would have tighter passages as compared to the standard doors. For those houses built before the 90’s, they would have such doors as narrow as about 18 inches. The newer houses would have a width of about 30 inches and a height of 96 inches.

Measuring your door properly

To replace the door correctly needs that you have the correct measurements too. Having the wrong measurements can lead to the door not fitting perfectly in the space provided. You have to measure the door from top to bottom, the width, and the thickness. Some people tend to forget about the thickness, which is still important.

Measuring your door properly

Photo via www.distinctivedoors.co.uk

Most of the time, you will get the thickness being around 1 ¾ inch. Make sure that the door you get is not too far from such type of measurement. Adding two inches to the width measurement should help a lot in fitting the door and trimming whenever possible. The additional measurement is also called the rough-in measurement. This measurement is important for those looking to use the pre-hung door.

Each time to take a measurement; make sure it is recorded properly in the notebook so that you do not end up forgetting the exact measurement. From the measurements, the storeowner would also know which type of door would work great for you.

Conclusion

Now that you know the answer to how tall is the average door, you can make a choice feeling comfortable that you have picked the right size. What is important is that you get to pick something that works great for the space provided. Taking the measurements first before heading to the store should help a lot. Most people would feel comfortable knowing that they have the right door they bought in the first place. With the door in place, you will not have to go through the same hassle of installing a new door again.

Important Tips on How to Install A Flagpole

Installing a flagpole is something easy and you can do it with a few tools. Get to learn the best method on how to install a flagpole.

More…

Introduction

When it comes to having the best way of showing patriotism for your country, it is mostly through showing off the flag. The flag is not going to be in position without having the flagpole. The flagpole is going to provide the necessary structure for hanging your flag easily. It is important that you know how to install a flagpole.

The whole process is not as hard as some would think, with the right materials and process, you should be in a position to get the job done easily.

What You’ll Need

  • Shovel
  • Hole digger
  • Concrete
  • Trowel
  • Pole

Steps

1. Find a suitable location

Find-a-suitable-location

You have to keep in mind the location of where you would be installing the flagpole. You need to find a flat area for easy installation. Some slopping terrain could make it harder for the user to end up having the flagpole installed. In most cases you want the flagpole in front of your house rather than at the back. This calls for looking for a flat surface in front of the house and get to work.

You might as well as take the time to flatten an area to give it the best level for handling this process.

2. Create the foundation for your anchor

As part of making sure that you get to keep the flagpole in one position always, there is the need to create an impressive foundation for the anchor. You will have to dig up to 30 inches deep and a diameter of 24 inches for the hole. You can use simple tools such as hole digger and shovel. Such a depth should provide the best support for the pole and prevent the ground moisture from affecting the wood.

Photo via www.thisoldhouse.com

If you are in an area where it does not drain well, you would have to use at least six inches of concrete to help absorb more water stagnating in the area. With the anchor in position, fill the hole with concrete making sure that the anchor is well covered.

3. Make holes for the pivot bolt

The pivot ball is an important part of making sure that the use of the flagpole is easier. You can lower the pole easily for maintenance and back up with ease when you have the pivot ball in position. With the concrete having settled in for 24 hours, you need now to create holes for the pivot ball. On the pole, measure about 42 inches starting from the bottom. This is where you would make your holes on either side of the pole.

You can use the 11/16-inch drill bits.

Make sure to do make holes on both the anchor and the flagpole, so that you can attach the bolts later to hold the two pieces together.

4. Install the flagpole

Install-the-flagpole

Photo via www.thisoldhouse.com

With the holes in position, you should be ready to attach the flagpole. Set the flagpole into the already installed anchor and insert the pivot ball. You need to adjust the pole until it is in a position that is easy for bolting. At this stage, you would need an assistant to help with keeping the pole in position while you attach the bolts.

With the bolts tightened, you can now install your flag. Just make sure to install the rope for holding the flag before bolting. If that is not the case, you can always lower the flagpole with ease and install it. Each time you lower the flagpole, make sure to tighten the bolts on the anchor to hold it in position quite well.

The video below should give you more tips on how to install the flagpole

How to maintain a flagpole

As part of making sure that the flagpole stays in the right condition as you would want, there are a few things you might want to consider.

  • Make sure to inspect the foundation and base every 6 months. Check for any signs of cracks.
  • Check out the pole regularly to see if it has any signs of fatigue, wear, bending, or weakness.
  • Check the halyards making sure there are no signs of abrasion, weakness or fraying.
  • Make sure to lower and clean the finials once in a while. This should help remove the dirt and dust buildup over time.
  • You might also want to keep an eye on strong winds. Take down the flag for high winds exceeding 65 km/h.

Conclusion

The overall installation process as you can see it is not hard at all. What is important is that you get to install correctly as much as possible. If you do not get it well tightened, then you might end up with disasters in the end. For a freely swinging flagpole, it is likely to fall onto the house or worse cause other incidents. Make sure that you take such precautions to keep yourself safe and those around you.