Category Archives for "WOODWORKING"

The Best Mechanic Tool Box You Could Buy on The Market

Got too many tools lying around when you are a mechanic? Then the best mechanic tool box can help organizing them.

As a mechanic, you always need to pack a lot of tools to deal with a wide range of situations. When the number of tool increases, you will need an efficient way to carry and preserve them. Of course, you can’t just stuff all of them in your shirt and pant pockets, you need a toolbox.

Read more

How to Obtain The Best Screwdriver Bit Set Available & Several Examples

Whether you are just a normal house owner or a professional mechanic, the screwdriver is an important tool to have. But no matter how simple task can be, you will struggle to complete without using the right tool at the right time. In the screwdriver case, a suitable choice of bit set will allow you to finish any job effectively and effortlessly.

Read more

5 of the Best Stainable Wood Fillers For Floors You Need in Your Home

Wood fillers can be a forgotten item in-house repair. However, there’s no mistaking that these are great solutions to fix little dents and cracks on any wooden material. In our homes, doors, floors, and cabinets are one of the standard places where damages can occur.

With that said, having the best stainable wood filler for floors is a must, especially if you have wooden floors. Even without it, the products that we will be reviewing, later on, can cover a wide range of applications. Stick around to find out more!


How does a wood filler work?

Wood fillers, or wood putty, are exactly as how they’re named to be. They are artificial compound materials that form into a paste. This paste can work with just like clay before applying. Once applied, this compound material acts as a filler for scraped, dented, or damaged wood.

When “filling” damaged wood, you just take a chunk of the filler and apply it like paste on the surface. Afterwards, it then dries up and sets, which you then spread out and sand later on. The way this works is almost similar to epoxy putty.

Contents of a wood filler


So, how does this sort of magic happen? It’s a matter of chemical combination and reactions. For starters, wood fillers usually use wood dust as its base material. There isn’t much surprise here because to fill wood; there has to be a wooden material.

Along with wood dust, comes a binder. Binders allow the wood filler to take in its shape and elasticity. Just imagine, if there’s no binder, then the wood filler would have a texture similar to wood dust. Of course, this won’t be possible to use as a filler given how delicate it is.

Binders vary depending on products. However, its function in the formula remains the same. Just imagine it as that raw egg yolk that you put in burgers and crab cakes. It works just the same way for a wood putty.

Lastly, it’s combined with a thinner. This thinner is what makes the putty easy to manipulate. That’s because the binder with the wood dust alone can make it too clumpy and solid. Thus, the thinner eases it out. Some thinners used can be quick to dry. That is why it’s essential to have sealed containers for your wood putty.

It’s also important to note that many wood fillers have colors mixed into them. That is why you’ll get wood fillers that are not brownish. Some are white, while others can come in beige or gray.

Additives in wood fillers

Additives-in-wood-fillers Best Stainable Wood Fillers For Floors

Finally, since we’re focusing on floors as the beneficiary of the wood putty, it’s important to remember that there can be additives. These additives are used to enhance the wood filler when you’re using it for broader applications. Of course, when we talk about more prominent uses, wooden flooring comes into mind.

The most common additive here is silica. Silica is a chemical that is rooted from silicon, being its oxide compound. Silica is a compound oxide that is suitable for many synthetic applications.

Since it’s found naturally in sand, it’s no surprise that it can be a substitute for wood dust in fillers. However, some brands use silica with wood dust. That gives it a more profound and integrated grain material to fill in and act as new wood.

Why is it essential to be stainable?


Some wood fillers are not stainable nor are they paintable. This kind of wood filler limits the material’s versatility. Moreover, it constricts what you can further do with your damaged flooring or wooden surface.

Now you might be wondering, what does a stainable wood filler mean? What is its importance? To explain it correctly, try to envision a wooden floor that has been applied with wood filling a few months ago.

Now, you’re starting to see the entire flooring get a little foggy and brittle due to age. Usually, homeowners maintain wooden floors by applying wooden floor polish to restore its shine. If you used a non-stainable wood filler, then this will break down once placed with the finish.

Wood is a very versatile material, and there’s a lot of things you can do with it regarding aesthetics. That is why getting a stainable wood filler is essential. That’s because it allows you to treat the liner just as how you can manage wood.

That means you can paint it, polish it, wet it, and even plane it. With a wood filler like this, you’re bound to forget that you also placed it in the first place!

Our Top 5 Picks

#1 Elmer’s Carpenter’s Color Change Wood Filler


Check Price & Review on Amazon

We’re starting off with the Elmer’s Carpenter’s color change wood filler because it’s one of the most famous ones in the market. Elmer’s is renowned for a variety of crafting products, and their wood filler has been one of the recent ones.

One of the best things about this wood filler is it works well with either light or dark dyers. The formula that Elmer’s Carpenter’s color change uses is very complicated, yet at the same time easy to use. That makes this wood filler a great item to have for any homeowner.


  • Patented wood formula is the backbone of this reliable wood filler
  • After the product has set and taken effect, you won’t notice that it’s there!
  • Good repair item for holes, dents, and scratches
  • It doesn’t use any toxic chemical, which makes it pleasant to work even indoor.
  • Excellent for indoor repairs
  • It’s stainable, sandable, and paintable, nothing else can beat it!
  • Fundamentally sound product
  • Elmer’s component goes purple and then it dries white whenever it is ready to sand


  • The lid needs to be more airtight to prevent this product from drying too quickly
  • Still, it works brilliantly for floors!
  • It can be a little challenging to apply when you’re not dealing with a flat surface
  • With that said, try to seal this correctly to avoid waste

#2 Minwax 21600000 High-Performance Wood Filler


Check Price & Review on Amazon

The Minwax High-Performance Wood Filler is a solid product that you can use indoors or outdoors. What you’ll first see here is its sleek container. The best thing about that tank is that it’s airtight. Thus, it doesn’t dry out too quickly.

Besides the shelf life, Minwax does an excellent job in repairing wood damages through its wood filler. The filler itself is guaranteed not to shrink, fall out, or crack when applying or drying. Even better is that you can sand this quickly without waiting for too long!


  • Fast and reliable
  • This product sets in 15 minutes after applying, and then is sandable in just 30 minutes!
  • Excellent for repairs but also capable as a working surface after application
  • You can drill, screw, and even plane a cover that comes with Minwax
  • Adheres well to wood and any porous surface
  • That is one of the reasons why it also dries quickly after application


  • Can be a little more regarding quantity
  • Unlike the 16 oz packaging of Elmer’s, Minwax only has 12 oz in their wood fillers
  • The quick dry feature can backfire on hot days since it can dry too quickly
  • That makes the product a little harder to work with

#3 3M Bondo Home Solutions Wood Filler


Check Price & Review on Amazon

Bondo Home Solutions is another well-known brand in the household repair market. Their wood filler is affordable, yet it’s also twice as much as the Elmer’s. Not only do you get a bargain for quantity here, but you’ll get a quality liner.

What Bondo’s wood filler specializes in is its restoration process. After sanding and staining this product, your wood surface will look good as new. It’s almost as if there was no dent or scraped area! That is all thanks to Bondo’s trustworthy formula for their wood fillers.


  • Easy to work with after it sets and dries
  • While staining it via paint is familiar, you can efficiently use buffers, sanders, and planers on it too!
  • Very affordable yet large in quantity
  • It’s packaged in one quart (32 US oz) despite having a similar price with products that have only half the size!
  • 2-part wood filler enhances this product’s performance
  • Bondo’s 2-part filler formula allows the wood filler to adhere better and remain intact without shrinking
  • Moreover, this wood filler is waterproof which further strengthens it as a filler


  • Can be a bit clumpy if you don’t attend to it quickly
  • Like the other products that set fast, it can backfire
  • It takes stain smoothly, but it can be enhanced to compete with other products better

#4 Elmer’s E855 Carpenter’s Wood Filler


Check Price & Review on Amazon

Elmer’s enters our list for a second time because of its top-notch restoration capability with their wood filler. This time around, Elmer’s changes their packaging. From a circular container, you can now get a wood filler in a tube.

It looks like your typical toothpaste at first, but Elmer’s E855 is a reliable and robust filler in a small package. It’s stainable and paintable, but at the same time, it doesn’t dry too quickly! This one’s best for professionals or hobbyists who need a filler in their pockets!


  • Lightweight and portable​
  • The Elmer’s E855 can comfortably fit in your pocket; this makes it great for outdoor jobs
  • Resists shrinking and cracking
  • Like any good wood filler, Elmer’s has a waterproof formula that prevents the pad from dissolving
  • Right drying time gives you a lot of leeways to work with
  • What’s right about Elmer’s is that it’s neither fast or slow in drying


  • The tube can have a lot of air inside, which can make it hard to squeeze out
  • Being a white colored wood filler can be challenging to some
  • Having a darker hue closer to wood can make the job easier

#5 FamoWood 40022126 Latex Wood Filler


Check Price & Review on Amazon

FamoWood comes last on our list with its Latex Wood Filler. FamoWood uses a solvent-free formula, which makes cleaning up with water a lot easier. Not to mention, the finished coating of the wood filler is guaranteed to protect your wood from the liquid.

With that said, it’s great to take in a lot of stains and paint at the same time. It dries in 15 minutes too, so you know when to work the filler. One of the best things about this product is after it sets, it’s almost as if you’re working with actual wood!


  • Drying time is just right​
  • The 15-minute mark gives you ample of time to work the filler without it getting clumpy
  • Great for filling gaps
  • Because it’ such a solid material, and acts like wood once it sets, you can use this like an epoxy too
  • Smooth transition from wood filler to “wood.”
  • Once you’ve applied this on your wood surface, it will seamlessly fit in the damaged areas after sanding.


  • The packaging can be quite small
  • Sometimes, you could encounter a half-full container
  • It can be a little thick so working out the filler at first can be challenging

Tips and tricks for buying wood fillers


Now that we’re well aware of the contents of a stainable wood filler, then you may check these few reminders first before reading our top 5 selections! These tips and tricks will guide you on how to buy useful wood filling.

  • Buy airtight packaging – Again, the wood putty can quickly dry out, so make sure the packaging is sealed tightly!
  • Drying time should not be too fast nor too slow – A wood filler that dries too quickly will make you panic in applying it. Meanwhile, a liner that dries slowly can make you impatient!
  • Make sure the colors match – perhaps one of the most common problems wood fillers encounter is color-matching. There are some products out there that have no trouble matching wooden colors. With that said, try to gauge the color of your floor before buying!
  • Buy a good liner that’s easy to mix – the best wood filler texture is somehow similar to wet cement. Anything thicker than that can be challenging to apply.

The Verdict

Getting yourself a wood filler might sound intimidating at first, especially if it’s your first time. There are dozens of wood fillers out there, and you might get yourself a bad quality product. However, with the right research, you can quickly get a product that works best for you.

Always remember to take into account the drying time, thinness, and stainability of the product. If you meet these three products, then patching up your floor will be a walk in the park. With these three factors in mind, we’ll give the edge to the Elmer’s Carpenter’s wood filler.

The Elmer’s Carpenter’s has the right blend of wood filling, thinness, and drying time to make it our winner. Not to mention, it also comes at an affordable price for 16 ounces. Still, you can always look at the other products if some peaked your interest!

If you found this article informative, don’t forget to share this with your fellow homeowners! Good luck!


How to Sharpen Wood Lathe Tools: The Professional Guide

Your lathe tools seem to become kind of dull recently. You really want to fix them but don’t know how? No need to worry since in this article, you can learn how to sharpen wood lathe tools on your own. With the right stuff and proper techniques, you can do this quickly and efficiently.



To woodworking and pen turning enthusiasts, a lathe is undoubtedly among the most popular machine to use in their works. However, after a certain period of time, the lathe tool started to become dull which lead to undesirable results. Therefore, knowing how to sharpen wood lathe tools is essential in order to restore their effectiveness.

A well – sharpened lathe tool allows you to create products with less opportunity for cracks and dents to form. This means you can reach perfection with your product relatively easy and that is why the tool sharpness is very important. The entire sharpening process is also simple, just gather a few items from your toolbox and common material.

List of necessary tools and gears you need to have


  • checkThe lathe tool that needs to be sharpened
  • checkOne sharpening jig: Will be elaborated below
  • checkA bench grinder: To sharpen the tool. You should use power grinder with adjustable speed to have a firm grip on the sharpening process.
  • checkProtective gears: To protect your eyes and hands while sharpening the lathe tool, goggles and gloves are mandatory. There will be a lot of dust and heat so make sure you have them on at all time.
  • checkSandpaper: To process the lathe tool after you finished sharpening.

The construction of the sharpening jig

The jig

To put it short, the sharpening jig main purpose is to steady the lathe tool while the sharpening takes place. You don’t need to have a pretty one, just make sure that it can do its job. There are also commercial models out there but if you can, try to make one to cut down the expense

With the sharpening jig, the sharpening process can proceed at a steady rate that guarantees a satisfactory result. All you have to do is grab some pieces of pinewood, create several 45 degrees angles then glue everything together. It probably takes one or two hours but you will get a useful tool to assist you for years.


The bracket

After you have finished gluing the jig, cut out another piece of wood in a U – shape frame. This will be the bracket for you to slide in the base of the jig so make sure its gap is suitable. After you got the bracket, place it down and punch in a butterfly screw on the top section.

When you complete both the jig and the bracket, push the jig base into the bracket. Slide the base in and out to see if there is any hindrance to the jig movements. If you feel everything is good, proceed to glue the bucket down on the table where you set the bench grinder.

Also consider putting a nut in the bracket backside under the screw so that you can bolt it down with ease. The jig base needs to be tightly secured by the screw before the sharpening process. The nut will keep the screw firmly in place while it’s being slowly bolted down to the jig base.

If the bracket is good and the sharpening jig is ready, time to start sharpening the lathe tool. As a reminder, make you have both the gloves and goggles on at this moment before proceeding. Clear out any obstacle on the ground around the bench, one moment of stumble and you lather tool will be useless.

The sharpening process

•Step 1: Position the lathe tool

Promptly slide the jig into the bracket and place the lathe tool against the jig 45-degree base. It’s vital that the lathe tool doesn’t have any space to wiggle or vibrate then the sharpening start. Adjust the lathe tool butt until you can minimize or eliminate the tool room for movement.

The next thing you need to focus on is the angle made by the lathe tip and the grindstone. The correct contact angle must not leave any noticeable gap or the product carving angle maybe ruined. It’s essential that you must achieve the precise angle before your turn on the bench grinder.

•Step 2: Lock in the jig and start sharpening

When both the lathe butt and tip are well positioned, bolt down the butterfly screw and get ready. The screw will steady the jig hence the lathe tool shall stay completely still in the entire process. Again, make sure that the goggles and the gloves are on before starting the bench grinder



You need to have a firm grip and apply an adequate amount of pressure but not too much. Just use enough force so the lathe tool doesn’t bounce or jump around. Hold the jig handle with your dominant hand while supporting the tool with the nondominant one.

Within a few moments, the tool will become very hot due to the grindstone friction. This is why a pair of gloves is necessary so you won’t burn your skin or shake your hand. For now, simply turn and rotate the lathe tool tip to your right.

Expect a lot of vibration in this part, you may feel kind of nervous if this is your first time. However, if you are really into woodworking and pen turning then it’s worth mastering this skill. Continue to move the lathe tool tip around the grindstone for 10 – 15 seconds.

•Step 3: Process the lathe tool and clean up

Finally, after you have done sharpening, the lathe tool shall have some burrs in its surface. Wait a couple minutes for the tool to cool down and take out your sandpaper. Slowly and carefully sand the lathe tool in the upward and away motion until you can’t feel any burrs.


Next, clean out the place and turn off the grinder. And remember to unscrew the bracket and remove the jig to store for future use. Instead of spending around 100$ for a commercial product, this handmade jig can do the same while saving you some money.


And that should cover pretty much all you should know about how to sharpen wood lathe tools. It’s is at heart a simple task which you can perform by yourself in the comfort of your house. If you got the right stuff and use the suitable techniques, the sharpening process will be just a walk in the park.

Is the article helpful to you? If it so then leaves us a comment, like and share.