How to Join Two Pieces of Wood End to End | Clever Techniques on Guides

Are you having trouble connecting the pieces together in your wood project? Effective joining techniques can considerably raise the wood project structural integrity and aesthetic value. But it’s not like anyone can do this, especially when they are not professional. But there is no need for further concern. You can learn how to join two pieces of wood end to end right now.



It’s always good to have some woodworking knowledge. Wood is a common material around and it would be beneficial to know how to handle them. Among the woodworking categories, you can say that joining wood pieces is arguably the most important of all.

If you do it right then your wood project will be tough and beautiful. Otherwise, it would be loose and ugly. So do you have any issue with this process? If you don’t know how to join two pieces of wood together then this article will serve you well.

How to Join Two Pieces of Wood End to End

Of course, everyone knows how to attach two pieces of wood together. The thing that matter is the way the pieces end up. If you do a shoddy job then you won’t have a pretty result. Yet it’s not really that difficult to perform. All you need are the appropriate tools and suitable skill. As long as you can ensure that, the wood project will turn out lovely. You can find the correct techniques below. Follow them closely and you can have a desirable result. But first, let’s take a look at the tools and gears you going to need.

Necessary tools and gears

As with any woodworking job, you can expect a lot of dust and splinter. So it’s vital that you protect yourself properly with goggles, gloves and face mask. Other than that, hammer and chisel would be your main tools. Each technique may also require additional tools and materials which would be explained in details later.

Make sure you working environment to be air tight. You don’t want the win to blow sawdust all over the house. When you got everything then let’s get into work.

The joining techniques

•Metal or plywood strap

This is the simplest way to connect the woods where appearance is not important. Basically, you just need to grab a wood plank and lay it sideway along the wood pieces.

After that, nail or glue the plank onto the wood pieces surfaces. If you manage to keep the pieces close together while doing this then it will work. It’s shockingly simple, right? But of course, if you value the look then this is not the best way. It did save you some money in the long run though.


Photo via

The thickness of the connecting plank depends on the wood pieces themselves. You must be sure that the plank can support the pieces weight. When you perform the joining, make sure the work surface is flat. Press the pieces against together so there is no gap.

Next, proceed to drill the holes to drive in the nails. If you intend to use glue then use something to press down the plank. Wait a couple hours for the glue to bond before handling the pieces again.

•Make a hole and screw the pieces together

Want to do a fast joining which barely noticeable? You may consider testing this out. Nothing too complicated here, just laid the pieces side by side. The next thing to do is promptly drill an angled hole on one piece toward another.

Make sure the hole stopped just barely before reaching out of the piece entirely. Now it’s very easy, simply drive a screw through the hole. You must make sure that the screw goes all the way to the other piece. Drive the screw till you feel the pieces are firmly connected.


This is indeed a fast way to attach the pieces. And if keep the hole hidden, you can barely feel the joining there. Unfortunately, this measure alone is not really reliable. You may have to drill multiple holes to properly secure the joining.

And even when you do that, there is a chance that it may fall out. So if you want to temporarily attach the wood pieces, you can’t find a better way than this. But if you want a long term solution, you should combine this with another joining technique.

•Use a Spline (or a doweling jig)


A slightly complex method, it’s used to increase the inner strength of the joining. First, you will need to use a saw blade to create a groove on both pieces. Generally, the groove should stay in the middle of each piece. The length and width of the grooves depend on the dimensions of the pieces.

When the grooves are n place, construct a Spline that can fit the grooves. Finally, pour glue upon the Spline and clamp it tightly between the pieces grooves. Keep the pieces close together till the glue dry.

Besides the Spline, you can use a doweling jig. The principle is pretty much the same. The only difference is that you will be drilling round holes instead of sawing grooves.


When you finish drilling sets of identical holes, pour glue over the doweling jigs. Next, promptly shove them into the pieces holes. Now you need to press the pieces against each other. Keep them like that till the glue dry.

•Half – lap joint

Attractive, simple and strong, those are the strong point of this particular technique. The essential point is to make the wood pieces overlap with each other. The more they overlap, the stronger the joint. You will need to use the saw blade here.


Now, you proceed to saw off the upper half of one piece and the lower half of the other. After that, clamp them together to see if they have a good fit yet. Make adjustment then use the glue to permanently connect them.


Whenever we work on something, we surely want it to be strong and beautiful. Same can be said about joining the wood pieces. If you just know how to join two pieces of wood end to end, woodworking would be very easy. It’s not that hard to do it on your own.

As long as you have the suitable tools and do exactly what stated above, it can be done. Just remember pay attention and stay alert at all time. If you can do that then everything will be fine.

Click Here to Leave a Comment Below 0 comments

Leave a Reply: