How To Obtain The Best Cabinet Table Saw On The Market

Whether it’s for personal uses or contract works, the cabinet table saw is not an investment you can make lightly. Due to the high acquisition cost of this particular tool, you better consider the quality of your options carefully. In order to buy the best cabinet table saw available, you must possess a good understanding of the market products.

 

How To Obtain The Best Cabinet Table Saw On The Market

How To Obtain The Best Cabinet Table Saw On The Market

In the case you are in desperate need of hints and recommendations, you come to the right place. Down below is a detailed list of important cabinet table saw characteristics plus several excellent products you have to check. Take a good look them and you shall able to make a wise decision at the end of the day.

A cabinet table saw shopping guide

Keep in mind that preferences and tastes vary a lot from one person to the other. The same thing can be said about product reviews and opinions so you should use them as references only. It’s advised to incorporate your own demands and requirements into the selection process to come up with a suitable purchase.

  • Motor HP

HP (Horse Power) of the tool motor is an important factor to consider since it indicates the saw cutting strength. Get a table saw with inadequate HP and you would not be able to slice though the desired material. Do take into account the workplace voltage too, the motor can only reach the designed HP specification when properly powered.

Table saws which employ a 1.5 to 2 HP motor tend to function normally at the 120V standard voltage. For 2 HP table saws, it draws between 18 and 24 Amp, the maximum cutting limit is two-inch hardwood. In the case that you want to go through thicker hardwood, you are going to need a stronger motor

3 to 5 HP table saws usually require higher voltage compared to their weaker counterparts with 240V the norm. You have to pay special attention to the safety issue around these tools, stronger motors often lead to higher kickbacks. In term of cutting strength, products in the category are capable of going through three inch thick materials.

  • Safety features

Your well being is the topmost priority, therefore, make sure that the table saw got appropriate safety features.

Stuff like flesh sensor and emergency stop could raise the price quite a bit but they are really necessary. Kickback prevention is also important, it let you position your hand on the wood and keep the tool blade away.

Carpenter cutting a white melamine profile with the disk saw, carpentry tools

Carpenter cutting a white melamine profile with the disk saw, carpentry tools

To enhance your safety further, go after a table saw which uses a riving knife instead of a splitter. The riving knife moves up and down with the tool blade so it shall shield you from unexpected flying wood splinters. It’s easy to remove if needed, able to deliver the safest cuttings possible and only utilize a basic overhead guard.

  • Stability and accuracy   

For most of the time, the weight of a cabinet table saw is formidable, often between 400 and 600 pounds. Nonetheless, certain products could still shake or wobble which is unacceptable when it comes to dedicated projects. Inspect the table structure and test it out to determine whether it’s stable enough or not.

The surface of the table must be completely flat, especially the blade proximity area. It largely affects the precision of the cutting works so pass over any saw with uneven surfaces.

  • Adaptable miter

You don’t want to end up with an odd – sized miter slot which seriously hampers the use of accessories. When you want to proceed with a purchase, ensure that you won’t have much trouble finding accessories for the miter. Wasting times and efforts to find compatible stuff is really tedious so be thorough.

Top 7 best cabinet table saws money can buy – 2018

1/ SawStop PCS31230 Cabinet Table Saw

Via Amazon.com

 

  • Motor: 3 HP
  • Voltage: 220V
  • Blade diameter: 10 Inches

Perfect for professional and enthusiast alike, the PCS31230 is one of the best cabinet table saws available. The SawStop advanced user protection system permits maximum safety while the tool is in operation. Even the slightest contact between the tool blade and the user skin would instantly activate the aluminum brake springs.

There are other safety features included within the tool such as the lockout key and knee height shutoff switch. The former prevent unauthorized activation of the tool blade while the latter lets you deactivate the tool with your knee. As a whole, the PCS31230 possesses an excellent safety system and control scheme for a table saw.

The 4-inch dust collection port on the back of the saw is able to keep your workplace fairly cleaned. Most of the particles generated from the cutting should be collected by the blade guard and deliver to the port. To ease the removal of collected, you can purchase the optional Overarm Dust Collection accessory.

Created to satisfy the toughest demands from experts, the PCS31230 would not let you down.

Pros

  • Straightforward operation
  • Easy to understand manual
  • Nice dust collection
  • Quality built

Cons

  • Certain issues about the extension wing
  • People complain about receiving damaged products
  • A bit expensive

2/ Powermatic PM2000 Cabinet Table Saw

Via Amazon.com

  • Motor: 5 HP
  • Voltage: 230V
  • Blade diameter: 10 Inches

Featuring a quick release riving knife design, the PM2000 from Powermatic greatly reduce potential risks like binding and kickback. While it’s a solid and heavy product, its retractable caster offers a nice level of mobility for the table saw. Thanks to the convenient extension table, you can use it as a portable workbench too.

A combination of adjustable angle indicator and heavy-duty fence allow you to perform cutting works with consistent accuracy. The stable construction results into near zero vibration whenever you operate the table saw. Height and tilt adjustments further enhance the quality performance of the PM2000.

If you want to change the blade of the saw, there is no need for special equipment and tool. Simply disengage the arbor lock and that would be it, it’ pretty much a one-handed, hassle-free operation. The Poly-V drive belt not only improves the strength of the motor but also reduces operation noise.

With great motor HP and respectable quality, the PM2000 is a robust table saw which everyone can use.

Pros

  • Mobile and versatile
  • Simple to modify
  • Work quietly
  • Powerful

Cons

  • Expensive
  • Incompatible with standard household voltage

3/ Grizzly G0690 Cabinet Table Saw

Via Amazon.com

  • Motor: 3 HP
  • Voltage: 220V
  • Blade diameter: 10 Inches

Strong and tough, the G0690 of Grizzly is a product that can serve you for a lifetime without fail. If you are an experienced table saw user, you would definitely like its features and specifications.  No matter what kind of project you attempt to do, the G0690 should get you the result you want.

The use of cast iron in the tool body eliminates most of the vibration often encountered in heavy duty tasks. With the flat and smooth top, you should have little trouble cutting through a sizable piece of wood. An efficient 4-inch dust extraction port keeps your workspace particle free for the length of the project.

For user safety, the riving knife not only moves up and down but also tilts with the blade.     It’s a quick release design so you can get the riving knife out in a blink of an eye. You can set it as you like to achieve the desired accuracy level.

In general, the G0690 is an affordable table saw for beginner and professional, its quality would not disappoint you.

Pros

  • Simple to operate
  • Great precision
  • Reasonable price
  • Stable platform

Cons

  • Big and heavy
  • Tricky assembly

4/ Shop Fox W1819 Cabinet Table Saw

Via Amazon.com

  • Motor: 3 HP
  • Voltage: 220V
  • Blade diameter: 10 Inches

From the cast iron table to the high-performance motor, components of the W1819 are designed to offer utmost satisfaction. Equipped with a cam lock T fence and a quick release riving knife, the tool delivers strong yet accurate cuttings.  The T-slot miter gauge is fully adjustable to match different user demands.

When it comes to user protection, the W1819 is able to give you peace of mind with its safety features. The transparent polycarbonate shield provides maximum visibility while keeping you safe and sound when the tool in operation. It stays in contact with the material but never truly get in your way of work.

Beside the guard, the kickback pawl and the riving knife form additional shield layers to protect the user.

Pros

  • Nice precision
  • Simple assembly
  • Little to no vibration
  • Great customer service

Cons

  • Formidable weight
  • Certain parts may come in incorrect dimension
  • The delivery service should be improved

5/ Jet Deluxe XactaSaw Cabinet Table Saw

 

Via Amazon.com

  • Motor: 5 HP
  • Voltage: 230V
  • Blade diameter: 10 Inches

From thin plywood sheets to thick wood boards, the Deluxe XactaSaw would let you cut through them with ease. The tilt trunnion lets you conveniently push in the materials while retaining excellent stability at all times. There are plenty of work surface to match even the most demanding project you can think of.

To perform the blade adjustment, the cast iron heavy duty cast iron wheels let you do it quickly and conveniently. Since Deluxe XactaSaw is a left-leaning tool, you can make burn free safe bevel cuts without problems. Its miter guard is built to deliver a consistent level of accuracy throughout the cuttings.

The table saw got many features to both keep up an effective performance and preserve your well being. Riving knife, kickback pawl, blade guard and so on should make you feel quite safe while operating the tool.  Overload protection is provided by the rail mounted magnetic switch that is well within your reach.

Aligning the miter slot is a breeze, all it takes is to loosen the 4 Hex head screws that are accessible exteriorly.

Pros

  • Sturdy built
  • Strong motor
  • Nice price
  • Cut well

Cons

  • Finish and rail support issues
  • Insufficient delivery service
  • Barely adequate customer service

6/ Delta UNISAW Cabinet Table Saw

 

Via Amazon.com

  • Motor: 3 HP
  • Voltage: 230V
  • Blade diameter: 10 Inches

With a stable single-cast trunnion system, the UNISAW possesses top-notch vibration control, smooth operation and high precision cuts. The dual front cranks permit you to adjust the height and bevel of the blade fairly easy. Due to the generous surface area, it’s simple to stabilize and cut through the material in a smooth manner.

In case you require more workspace, there is a small excision table you can deploy. Storage drawers are also available which can accommodate saw blades, riving knifes, arbor nut flange and split guard assembly. Since the cabinet is built from a cast iron base, the tool stability and footing are rather good for its size.

The tool On/Off switch can be accessed from many angles so you are able to activate/deactivate the tool conveniently. In order to change the blade, the only tool you are going to need is a wrench. For dust collection, the UNISAW utilizes a collector hose along with a sloping bottom cabinet to gather the particles.

Pros

  • Great geometry table top
  • Large blade opening
  • Vibration free operation
  • Effective dust extraction

Cons

  • There are complains about missing components
  • The drawers are optional accessories
  • Less than ideal fence

Conclusion

And those are some of the best cabinet table saws on the market, see anything you like. It’s surely difficult to get a suitable product when you know little about market options. But with the help of the information, you should be able to make a wise investment.

Click Here to Leave a Comment Below 0 comments

Leave a Reply: